BMW X1 2013 Bulb Size
Bulb size chart
This 2013 BMW X1 bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, interior lamp, or exterior signal bulb, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
The 2013 BMW X1 uses different bulb types depending on the lighting setup and trim, so the same model year can have more than one valid bulb list. This page is organized to make it simple to compare each position, from the front turn signal and fog lights to the license plate, cargo area, and rear brake and reverse bulbs.
For best fitment, always confirm whether your X1 has halogen headlights or HID headlights, since some bulb positions change with the lighting package. Trim level, market, and body style can also affect the exact bulb used, especially for courtesy and parking lights. If you are converting to LED aftermarket bulbs, check polarity, depth, and heat management before buying, because not every LED replacement is a direct plug-in match. When possible, inspect the installed bulb before ordering so you can confirm the base type and avoid surprises during installation.
FAQ
What is the headlight bulb type for a 2013 BMW X1?
The high beam and low beam headlight bulb listed for the 2013 BMW X1 is D1S. Always confirm your vehicle’s original headlight setup before ordering, since lighting equipment can vary by market and package.
What bulb does the front turn signal use on the 2013 BMW X1?
The front turn signal light bulb is 7507. This is one of the most common exterior bulbs to verify by position, since it is separate from the headlight and parking light assemblies.
Which bulb fits the rear turn signal on this X1?
The rear turn signal light bulb is 7506. If you are replacing rear signal bulbs, check both sides and compare the old bulb base to the replacement before installing.
What is the brake light bulb size for the 2013 BMW X1?
The brake light bulb is 7506R. This is the bulb listed for the brake light function on this model year.
What bulb is used for the backup reverse light?
The back up reverse light bulb is 7506. If the reverse lights are dim or out, replacing them in pairs can help keep brightness even from side to side.
Are the license plate lights LED on the 2013 BMW X1?
Yes, the license plate light bulb is listed as LED. That means the replacement is handled differently than a standard halogen bulb, so you should match the correct LED style for the housing.
What bulb fits the parking lights on a halogen-headlight X1?
For halogen headlights, the parking light bulb is 2825, 98. This differs from the HID-headlight version, so headlight package matters when choosing the correct bulb.
What bulb fits the parking lights on an HID-headlight X1?
For HID headlights, the parking light bulb is LED. This is one of the clearest examples of why the page is organized by lighting position and headlight type.
What are the fog light bulb options for the 2013 BMW X1?
The front fog light bulb options listed are H11 LED, H16 LED, and H8 LED. The exact fit can depend on the original setup, so checking the installed bulb is a smart step before purchase.
Which bulbs are used for the interior map and dome lights?
The map light bulb is 2886X, and the dome light bulb is also 2886X. Rear reading lights use 64132, while the glove box light uses 6418.
What bulbs are used in the vanity mirror, trunk, and courtesy lights?
The vanity mirror light bulb is 6411, 6428. The trunk or cargo area light is also 6411, 6428, and one courtesy light listing uses the same 6411, 6428 base as well.
Do trim and lighting package differences matter on the 2013 BMW X1?
Yes. Trim, lighting package, market, and body style can change bulb fitment on the 2013 BMW X1. That is why it is important to verify the exact bulb position and compare the installed bulb before ordering replacements.