BMW X5 2009 Bulb Size
Bulb size chart
This 2009 BMW X5 bulb size guide helps you verify the correct bulbs by lighting position, so you can replace only what you need with less guesswork. Because BMW used different lighting setups by market and body style, the exact bulb on your X5 can vary, especially for exterior lamps and package-dependent interior lights.
Use this page as a quick reference for common replacement points on the 2009 BMW X5, including headlights, fog lights, brake lights, reverse lights, parking lights, and cabin bulbs. Matching the bulb to the correct location is the best way to avoid ordering the wrong part and to make sure the new bulb fits and functions properly.
Fitment on the 2009 X5 can change with trim level, lighting package, halogen versus xenon equipment, and whether the vehicle has factory LED components in certain positions. If you are converting from halogen to LED, remember that an LED replacement may need a compatible design for proper beam pattern, brightness, and warning-free operation. Aftermarket conversions can also affect color, output, and error messages, so it is smart to compare the installed bulb before buying and confirm the socket style, base type, and physical length. When in doubt, remove the old bulb and match it directly to the listing for your exact lighting position.
FAQ
What bulb does the 2009 BMW X5 use for the low and high beam headlight setup?
For X5 models listed with a combined high beam and low beam headlight bulb, the bulb type is D1S. Some vehicles may also use a separate high beam bulb, so check your specific headlamp configuration before ordering.
What is the high beam bulb for the 2009 BMW X5?
The high beam bulb listed for this model is H1. This applies to configurations that use a separate high beam bulb rather than a combined xenon setup.
What bulb fits the front fog lights on a 2009 BMW X5?
The front fog light bulb options listed are H11 LED and H16 LED. The correct choice can depend on the exact fog lamp housing and market-specific equipment.
What bulb is used for the reverse lights on this X5?
The back up reverse light bulb is listed as 921. That is the bulb to check first if your reverse lights are out.
What bulb fits the front parking lights and side marker lights?
Both the front parking light and the front side marker light use bulb type 2827 on the 2009 BMW X5.
What bulb is used for the front turn signal on the 2009 BMW X5?
The front turn signal bulb is listed as 5200. Always verify the socket and bulb shape before purchase, since lighting packages can vary.
What bulb does the rear turn signal use?
The rear turn signal bulb is 7506. If you are replacing a rear signal, this is the bulb type to match.
What are the brake light bulb options for the 2009 BMW X5?
Brake light fitment can vary on this vehicle. The listed options include 921, 7506R, and 1156R depending on the lighting position and original configuration.
What bulb is used for the license plate lights?
The license plate light bulb is listed as LED. Because the source is already specified as LED, it is important to match the exact lamp assembly and connector style rather than assuming a standard halogen bulb.
What bulb fits the center high mount stop light?
The center high mount stop light bulb is listed as LED. Check the assembly carefully, since some versions may use an integrated LED module rather than a replaceable standard bulb.
What interior bulbs are used in the glove box, trunk, doors, and reading lights?
Several interior positions on the 2009 BMW X5 use 2825 or 98 bulbs, including the glove box light, trunk or cargo area light, interior door light, stepwell light, rear reading light, and one courtesy light option.
What bulb is used for the dome light and vanity mirror lights?
The dome light bulb is listed as 2886X. The vanity mirror light bulb uses 6411 or 6428, and one courtesy light option also uses 6411 or 6428.
Can trim level or package change the bulb size on a 2009 BMW X5?
Yes. Trim, lighting package, market, and body style can all affect bulb fitment on the 2009 BMW X5. That is why it is best to confirm the exact bulb by lighting position before ordering.
Should I check the old bulb before buying a replacement?
Yes. Even when a bulb size is listed, checking the installed bulb is the safest way to confirm the correct fit, especially for exterior lights and any position that may differ by package or market.