Chevrolet Volt 2014 Bulb Size
Bulb size chart
This 2014 Chevrolet Volt bulb size guide is organized by lighting position so you can quickly verify the correct replacement bulb for each exterior and interior lamp. Whether you are replacing a headlight, license plate light, map light, or rear signal bulb, this page is meant to help you match the bulb size to the exact location on the car.
The 2014 Chevrolet Volt uses a mix of LED and replaceable bulb types depending on the lamp position. Because the same model year can have different lighting setups by market or package, checking the bulb chart by location is the safest way to confirm fitment before you buy.
Fitment can vary with trim, lighting package, body style, and regional equipment, so it is smart to compare the chart with the bulb already installed in your vehicle. Some positions on the 2014 Volt use LED assemblies, while others use serviceable bulbs such as 9012, 7444NA, 2825/98, 3157, 194/7441, or 7065 depending on the lamp. If you are converting from halogen to LED, make sure the replacement is compatible with the socket, polarity, and any vehicle lighting checks. Aftermarket LED upgrades may also need load resistors or CAN-bus compatible designs to avoid warnings or hyperflash. Before ordering, remove the old bulb and confirm the base style and connector shape, especially for front signals, parking lights, reverse lights, and interior lamps.
FAQ
What bulbs does a 2014 Chevrolet Volt use for the headlights?
The headlight bulb listed for the 2014 Chevrolet Volt is 9012 for both high beam and low beam on this page. Always confirm the installed bulb before purchase because lighting equipment can vary by market or package.
Are the brake lights on the 2014 Volt replaceable bulbs?
The brake light bulb position is listed as LED. On many vehicles this means the lamp uses an LED module rather than a standard replaceable bulb, so replacement may involve the full assembly instead of a simple bulb swap.
What is the rear turn signal bulb size for the 2014 Chevrolet Volt?
The rear turn signal light bulb is listed as LED. If your vehicle has an LED rear signal setup, you should verify whether the service part is a bulb, module, or complete lamp assembly.
What bulb fits the front turn signal on a 2014 Volt?
The front turn signal light bulb is 7444NA. This is the bulb size shown for the 2014 Chevrolet Volt front signal position on this page.
What bulb is used for the parking lights?
The parking light bulb is 7444NA. The same bulb size is also listed for the front side marker light on this page.
What bulb size is used for the front side marker light?
The front side marker light bulb is 7444NA. Check the existing bulb and socket before ordering, since some trims or markets may differ.
What bulb fits the rear side marker light and tail light?
The rear side marker light bulb is listed as LED, and the tail light bulb is also listed as LED. These positions may be integrated LED units rather than standard replaceable bulbs.
What is the reverse light bulb size on the 2014 Chevrolet Volt?
The back up reverse light bulb is 3157. This is the bulb size shown for the reverse lamp position on this page.
What bulbs are used for the license plate and map lights?
The license plate light bulb is listed as 2825 or 98, and the map light bulb is also listed as 2825 or 98. Either size may appear depending on the specific lamp setup.
What bulb fits the dome light and trunk or cargo area light?
The dome light bulb and trunk or cargo area light are listed as 194 or 7441. Confirm the bulb already installed in the car before buying replacements.
What bulb is used for the vanity mirror light?
The vanity mirror light bulb is 7065. This is the bulb size shown for the 2014 Chevrolet Volt vanity mirror lamp position.
Do all 2014 Chevrolet Volt models use the same bulb sizes?
Not always. Trim level, lighting package, body style, and market can change the bulb setup, especially for LED-equipped positions and exterior lamps.
Can I replace LED bulbs with standard halogen bulbs on this car?
Usually no for positions listed as LED. LED lamps are often integrated or designed for specific housings, so a halogen bulb may not fit or function correctly.
Should I check the old bulb before ordering replacements?
Yes. Checking the installed bulb is the best way to confirm fitment, especially for interior lights, front signal bulbs, and any position that may vary by package or market.