Dodge Caliber 2011 Bulb Size
Bulb size chart
This 2011 Dodge Caliber bulb size guide helps you quickly verify the correct bulbs by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, tail light, dome light, or license plate lamp, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
The 2011 Dodge Caliber uses several different bulb types depending on where the light is located. This page organizes the common exterior and interior bulbs by position, making it easier to compare your vehicle’s installed bulbs with the listed sizes before you buy replacements.
Fitment can vary by trim, lighting package, market, and body style, so always confirm the bulb already installed in your 2011 Dodge Caliber before ordering. Some positions may use halogen bulbs from the factory, while others may be converted to LED with aftermarket kits or replacement bulbs. If your Caliber has been modified, especially in the headlight or interior lighting areas, the original bulb size may no longer match what is currently installed. Checking the old bulb, socket style, and connector shape is the safest way to confirm compatibility.
FAQ
What headlight bulb does a 2011 Dodge Caliber use?
The listed headlight bulb for both high beam and low beam on the 2011 Dodge Caliber is H13. Always confirm your current setup before purchasing, especially if the vehicle has been converted or modified.
What bulb is used for the front turn signal on this model?
The front turn signal light bulb listed for the 2011 Dodge Caliber is 3157A. This same bulb size is also shown for the parking light and front side marker positions.
What bulb fits the rear turn signal?
The rear turn signal light bulb listed for the 2011 Dodge Caliber is 3157. Rear signal bulbs can differ from the front, so it is important to check the correct position on the vehicle.
What are the brake and tail light bulb sizes?
The brake light bulb and tail light bulb listed for the 2011 Dodge Caliber are both 3157R. That makes it easier to stock the correct replacement for the rear lamp assembly.
What bulb does the back up reverse light use?
The back up reverse light bulb listed for the 2011 Dodge Caliber is 921. If one reverse light is out, it is a good idea to check both sides at the same time.
What bulb is used for the license plate lights?
The license plate light bulb options listed for the 2011 Dodge Caliber are 2825 and 98. Either size may appear depending on the exact lamp setup, so verify the installed bulb before ordering.
What bulb fits the dome light?
The dome light bulb listed for the 2011 Dodge Caliber is 578. This is a common interior bulb size, but it is still smart to compare it with the bulb already in the car.
What bulb is used for the map light?
The map light bulb listed for the 2011 Dodge Caliber is 578. If your overhead console has been changed or upgraded, check the installed bulb to confirm the match.
Does the 2011 Dodge Caliber use the same bulb for the parking light and front side marker?
Yes, the listed bulb size for the parking light and front side marker light is 3157A. These positions are grouped together on this page because they use the same bulb size.
What bulb does the center high mount stop light use?
The center high mount stop light bulb is listed as LED for the 2011 Dodge Caliber. Because this position is shown as LED rather than a standard replaceable bulb number, check the lamp assembly carefully before purchasing parts.
What bulb is used for the trunk or cargo area light?
The trunk or cargo area light bulb listed for the 2011 Dodge Caliber is 212-2. This may apply only to vehicles equipped with that cargo light position.
Why should I check the bulb in my car before buying replacements?
Because trim level, package content, and market differences can change the lighting setup on a 2011 Dodge Caliber. Checking the installed bulb helps confirm the correct size, especially if the vehicle has aftermarket LEDs or previous repairs.