Dodge Charger 2010 Bulb Size
Bulb size chart
This 2010 Dodge Charger bulb size guide helps you quickly verify the correct bulb for each lighting position on your car. Use it to match the right part by location, whether you are replacing a headlight, tail light, interior lamp, or a small exterior marker light.
The 2010 Charger was offered with different lighting setups depending on trim, market, body style, and package. That means the bulb size can vary from one position to another, so checking the chart by lighting position is the safest way to confirm fitment before you buy.
For best results, compare the bulb listed on this page with the bulb already installed in your Charger, especially if your car has halogen headlights, HID headlights, or an aftermarket conversion. Some positions use different bulb types depending on equipment, and trim or package differences can change the fitment. If the vehicle has been modified with LED replacement bulbs, projector retrofits, or nonfactory housings, the original bulb size may no longer tell the full story. Always inspect the old bulb, connector, and housing before ordering replacements.
FAQ
What bulb does a 2010 Dodge Charger use for the low beam headlight with halogen headlights?
The low beam bulb for 2010 Dodge Charger models with halogen headlights is 9006XS.
What bulb fits the high beam on a 2010 Dodge Charger with halogen headlights?
The high beam bulb for halogen-equipped 2010 Dodge Charger models is 9005XS.
What low beam bulb is used on a 2010 Dodge Charger with HID headlights?
The low beam bulb for 2010 Dodge Charger models with HID headlights is D1S.
What high beam bulb is used on a 2010 Dodge Charger with HID headlights?
The high beam bulb for 2010 Dodge Charger models with HID headlights is 9005.
What bulb size is used for the front turn signal and parking light on this Charger?
The front turn signal light bulb and the parking light bulb are both listed as 3157A.
What bulb does the rear turn signal use on a 2010 Dodge Charger?
The rear turn signal light bulb is 3057.
What bulb is used for the brake light and tail light?
The brake light bulb and the tail light bulb are both listed as 3057R.
What bulb fits the reverse light on the 2010 Dodge Charger?
The back up reverse light bulb is 921.
What bulb is used for the license plate lights?
The license plate light bulbs are listed as 168 and 917.
What bulb fits the dome light and map light?
The dome light bulb and map light bulb are both listed as 578.
What bulb is used for the glove box light?
The glove box light bulb is listed as 194 or 7441.
What bulb fits the trunk or cargo area light and interior door light?
Both the trunk or cargo area light and the interior door light use bulb 562.
Does the 2010 Dodge Charger use the same bulb in every trim?
Not always. Trim, lighting package, market, and body style can affect bulb fitment, so it is important to verify the exact lighting position on your specific car.
Can I replace the factory bulbs with LED bulbs on my 2010 Dodge Charger?
Yes, many positions can be converted to LED, but the replacement must match the socket and should be checked for polarity, brightness, and fit inside the housing.