Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Honda Fit 2011 Bulb Size
Bulb size chart
H11 LED Bulbs
Used for: Fog Light Bulb Front
H16 LED Bulbs
Used for: Fog Light Bulb Front
9003 Bulbs
Used for: Headlight Bulb High Beam and Low Beam
The 2011 Honda Fit is a practical subcompact hatchback, but bulb fitment can still vary depending on trim, market, and lighting package. This page helps you verify the correct bulb sizes by lighting position so you can match the right replacement before you buy.
For the 2011 Honda Fit, the available bulb chart shows 9003 for the headlight high beam and low beam position, with front fog light options listed as H11 LED or H16 LED. Use the lighting position on the page to confirm what applies to your vehicle, since not every Fit is equipped the same way.
Fitment on the 2011 Honda Fit can differ by body style, trim level, and regional equipment, so it is smart to compare the chart with the bulbs already installed in your car. If your vehicle uses halogen headlights, keep in mind that LED replacements may require additional parts, proper polarity, or an adapter to fit and function correctly. Aftermarket conversions can also change beam pattern and glare, especially in reflector housings, so check legality and performance before upgrading. When possible, remove one bulb and read the base marking before ordering, since the installed bulb is the best confirmation for your exact car.
FAQ
What headlight bulb size does a 2011 Honda Fit use?
The available chart for the 2011 Honda Fit lists 9003 for the headlight high beam and low beam position.
Does the 2011 Honda Fit use the same bulb for high beam and low beam?
Yes, based on the chart on this page, the headlight high beam and low beam position uses 9003.
What front fog light bulb sizes are shown for the 2011 Honda Fit?
The front fog light listing shows H11 LED and H16 LED as the available bulb options.
Why might bulb fitment differ on the same 2011 Honda Fit model?
Trim, lighting package, market, and body style can affect the exact bulb used, so two 2011 Fits may not be equipped the same way.
Should I trust the bulb chart or the bulb already in my car?
Use both if possible. The chart is a helpful guide, but checking the installed bulb is the best way to confirm the exact fitment for your vehicle.
Can I replace the 2011 Honda Fit headlights with LED bulbs?
Possibly, but LED conversions depend on the housing, fitment, and local rules. Some LED bulbs may need adapters or additional components to install correctly.
Will an LED fog light bulb fit every 2011 Honda Fit?
Not necessarily. The page lists H11 LED and H16 LED options, but the correct choice depends on the specific fog light setup on your car.
How do I know if my 2011 Honda Fit has fog lights?
Check the front bumper area for fog lamp housings or review the trim equipment on your vehicle. Some trims may not include fog lights at all.
What should I check before buying replacement bulbs for my 2011 Honda Fit?
Confirm the bulb position, read the marking on the installed bulb, and compare it with the chart. Also verify whether your car uses halogen or LED equipment.
Is the 9003 bulb used for both sides of the car?
Yes, the 9003 headlight bulb size applies to the headlight position on both sides, assuming your vehicle matches the charted configuration.
Can aftermarket bulbs change the beam pattern on my 2011 Honda Fit?
Yes. Especially with LED conversions in halogen housings, the beam pattern can change and may create glare or reduced road coverage if the bulb is not a good match.
What is the safest way to replace a bulb on a 2011 Honda Fit?
Turn the lights off, let the bulb cool, access the housing carefully, and compare the old bulb to the replacement before installing it. If the fit seems different, stop and recheck the bulb type.