Used for: Back Up Reverse Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
The 2020 Honda Insight uses a mostly LED lighting setup, and this page helps you verify bulb sizes by lighting position before you buy replacements. Whether you are checking the front end, rear lamps, or interior lights, matching the correct bulb to the correct location is the easiest way to avoid fitment mistakes.
For the 2020 Honda Insight, many exterior bulbs are listed as LED, while a few interior and reverse light positions use standard bulb sizes. Because trim level, lighting package, market, and body style can affect the exact setup, it is smart to confirm the bulb location on your vehicle before ordering any parts.
Fitment can vary on the 2020 Honda Insight, especially between trims and packages that may use different lighting hardware or factory LED assemblies. Some positions are simple bulb replacements, while others may be integrated LED units that are not serviced like a traditional halogen bulb. If you are considering an aftermarket LED conversion, make sure the bulb base, polarity, and physical clearance are compatible with the housing. The safest approach is to check the installed bulb or the original lamp assembly before purchase, especially for interior lights, reverse lights, and any turn signal position that may differ by market.
The page lists the 2020 Honda Insight headlight bulbs by position as LED for both low beam and high beam. Because the lighting design may vary by trim or market, confirm the exact headlamp setup on your car before replacing anything.
Yes, the fog light bulb position is listed as LED on this page. If your car has fog lights, check whether the lamp is a replaceable bulb or a sealed LED unit before ordering parts.
The rear turn signal bulb is listed as 7440A. This is different from the front turn signal listing, so it is important to match the correct side and position.
The front turn signal light bulb is listed as LED, 7440. That means the front signal position is associated with a 7440-style bulb listing, but the exact fit can still depend on the vehicle’s lighting package.
The back up reverse light bulb is listed as 921. This is one of the few non-LED exterior bulb sizes shown on the page.
The license plate light bulb is listed as LED. If you are replacing license plate lighting, verify whether your car uses a serviceable bulb or a complete LED lamp module.
Both the dome light bulb and map light bulb are listed as 194, 7441. These shared sizes are common for small interior lamps, but it is still best to compare the installed bulb before buying.
The trunk or cargo area light is listed as 168, 917. Since interior lamp housings can differ, checking the existing bulb is a good idea before ordering replacements.
Yes, both the brake light bulb and tail light bulb are listed as LED on this page. On many vehicles, these may be integrated LED assemblies rather than standard replaceable bulbs.
The daytime running light bulb is listed as LED, and both the front and rear side marker light bulbs are also listed as LED. These positions are often tied to the vehicle’s factory lighting design, so replacement methods can vary.
Yes. Trim and lighting package can vary by market and body style, which can affect the exact bulb setup. Always confirm the bulb position on your specific vehicle instead of relying only on the model year.
Yes. Checking the installed bulb or lamp assembly is the best way to confirm fitment, especially for LED-equipped positions and any aftermarket conversion. This helps avoid ordering the wrong base, size, or style.
