
PIAA 18803 881 Xtreme White Plus
$66.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(Hatchback), License Plate Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Trunk or Cargo Area Light
Used for: Center High Mount Stop Light Bulb(Hatchback), License Plate Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Trunk or Cargo Area Light
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
This page helps you confirm the bulb sizes for the 2012 Hyundai Accent by lighting position, so you can match the correct bulb to each exterior and interior lamp. Whether you are replacing a headlight, brake light, map light, or license plate light, checking the bulb location first is the easiest way to avoid ordering the wrong part.
The 2012 Hyundai Accent uses different bulb types depending on the lamp and body style, and some fitments can vary by market or lighting package. Use the chart on this page as a quick reference for common bulb positions on the sedan and hatchback, including high beam and low beam headlights, reverse lights, dome lights, and rear signal lamps.
For best fitment, always compare the bulb size on this page with the bulb already installed in your vehicle before buying replacements. Trim level, factory halogen setup, and aftermarket LED conversions can all affect what works correctly, especially for exterior lights that may need the right base style, brightness, and beam pattern. If your Accent has been modified, or if you are unsure whether it is a sedan or hatchback application, verify the original bulb and housing before purchase so you do not end up with a bulb that fits physically but does not perform as expected.
The listed headlight bulb for both high beam and low beam is 9003. Always confirm the bulb in your specific housing before replacing it, especially if the car has been modified.
The front fog light bulb is 881. This is a common fitment for factory fog lamp housings on this model.
The brake light bulb listed for this vehicle is 2357R.
The tail light bulb listed is 2357R, which is the same bulb size shown for the brake light position on this page.
The rear turn signal bulb is 1156A.
The front turn signal bulb is 2357A.
The parking light bulb listed is 2357A.
The license plate light bulb is listed as 2825 or 98.
Both the dome light and map light use DE3175 bulbs.
The back up reverse light bulb is 921.
Not always. The page lists 921 for the center high mount stop light in one application and 2825 or 98 for the hatchback center high mount stop light, so body style matters.
Some lighting positions may accept more than one bulb designation depending on market, trim, or production variation. That is why it is important to match the bulb by position and verify the installed bulb before ordering.
Yes, many owners choose LED replacements, but you should make sure the LED matches the socket, fits the housing, and works with the vehicle without causing glare, warning lights, or poor beam pattern.
Check the exact bulb position, confirm whether your car is a sedan or hatchback, compare the installed bulb number, and make sure the replacement matches the original base and size.