
PIAA 18803 881 Xtreme White Plus
$66.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(without projector-type headlights), Tail Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2013 Hyundai Veloster by lighting position, so you can match the right bulb to the right socket before you buy. Because trim and lighting equipment can vary, the correct fit may depend on whether your car has projector-type headlights, a specific lighting package, or a market-specific configuration.
Use the bulb chart to check the headlight, tail light, brake light, turn signal, reverse, fog, license plate, dome, map, trunk, and side marker locations one by one. That makes it easier to replace only the bulb you need and avoid ordering the wrong size for your Veloster.
Fitment on the 2013 Hyundai Veloster can differ by trim, body style, and lighting package, so always compare the chart with the bulb already installed in your vehicle. Some positions use LED assemblies, while others use standard replaceable bulbs, and halogen-to-LED aftermarket conversions may require additional parts or may not fit correctly without adapters or resistors. Before purchasing, check the old bulb number, confirm whether your car has projector-type headlights, and inspect the socket style and physical shape to make sure the replacement will work as expected.
The low beam headlight bulb listed for the 2013 Hyundai Veloster is H11B. Always confirm the headlight type on your specific car before ordering, since equipment can vary by market and trim.
The front turn signal light bulb for the 2013 Hyundai Veloster is 1156A. This is a useful bulb to verify if your front signal is dim, burned out, or being replaced during a lighting refresh.
The back up reverse light bulb is 921. If your reverse lights are not working, check both the bulb and the socket before replacing parts.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the exact lamp setup, so it is best to compare the installed bulb before buying.
Yes. For Velosters with projector-type headlights, the brake light bulb and tail light bulb are listed as LED, and the rear side marker bulb is also LED. That setup differs from models without projector-type headlights.
For Velosters without projector-type headlights, the brake light bulb is 2357R and the tail light bulb is also 2357R. These are separate from the LED setup used on projector-equipped models.
The front side marker light bulb is 168NA. If one side is out, it is smart to replace both sides at the same time for even lighting.
The rear side marker bulb depends on headlight package. With projector-type headlights, the rear side marker is LED. Without projector-type headlights, the rear side marker bulb is 168NA.
The dome light bulb and map light bulb are both DE3175 on the 2013 Hyundai Veloster. These interior bulbs are commonly replaced together when one starts to dim.
The trunk or cargo area light uses a 6418 bulb. If the cargo area is dark, check the bulb first and then inspect the fuse and switch if needed.
The front fog light bulb is 881. Make sure the replacement matches the original socket and heat output requirements, especially if you are considering an LED upgrade.
No. Trim and lighting package can change the bulb type, especially for headlights, rear lamps, and LED-equipped positions. The safest approach is to verify the exact bulb by position and compare it to the bulb already installed in your car.