Used for: Dome Light Bulb
Used for: Dome Light Bulb
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Trunk or Cargo Area Light
This page is for the 2022 Infiniti Q50 and is designed to help you verify bulb sizes by lighting position before you buy replacements. Because the Q50 can use different lighting setups depending on trim, package, market, and body style, checking the exact location on the vehicle is the safest way to match the correct bulb.
For this year, many exterior lighting functions are listed as LED, including the headlight high beam and low beam, fog light, brake light, turn signals, parking light, tail light, daytime running light, reverse light, license plate light, and side marker lights. Interior positions such as the map light, dome light, door light, and trunk or cargo area light may use different bulb types, so it is important to compare the chart with what is installed in your car.
Fitment can vary on the 2022 Infiniti Q50, especially between trims and lighting packages, so do not assume every bulb location is the same across all versions. Some positions are factory LED assemblies, while others may use replaceable bulbs or different socket styles depending on market and equipment. If you are planning an aftermarket LED conversion, make sure the bulb, base, polarity, and housing compatibility are correct, and always check the installed bulb before ordering. A quick visual inspection of the old bulb or socket can prevent returns and help confirm whether your car has a halogen-style replaceable bulb or a sealed LED module.
Yes. On this page, many exterior positions for the 2022 Infiniti Q50 are listed as LED, including the headlights, fog lights, brake lights, turn signals, parking lights, tail lights, daytime running lights, reverse lights, license plate lights, and side markers.
Use the lighting position on the vehicle, then compare it with the bulb chart for the 2022 Infiniti Q50. Because trim and package differences can change the setup, the position-based listing is more reliable than guessing by model name alone.
Not always in the same way. The chart lists the headlight high beam and low beam as LED, which often means the light source is part of an LED assembly rather than a simple plug-in bulb. Check your exact headlamp design before ordering parts.
The front fog lights are listed as LED for the 2022 Infiniti Q50. That usually means fitment depends on the complete lamp design, so verify whether your vehicle uses a serviceable bulb or a sealed LED unit before purchasing.
Often yes, but the exact procedure depends on the housing design. The page lists the license plate light bulb as LED, so you should confirm whether your Q50 uses a replaceable LED bulb or an integrated lamp module.
The interior door light bulb is listed as 168 or 917 for the 2022 Infiniti Q50. If your car has this replaceable bulb style, match the installed bulb number before buying a replacement.
The dome light bulb is listed as 194 or 7441. These are the bulb numbers shown for this page, and you should verify the installed bulb to make sure your specific trim matches.
The trunk or cargo area light is listed as 158. As with other interior bulbs, check the existing bulb and socket style before ordering, since some vehicles may have different equipment by market.
Yes, both the rear turn signal light and brake light are listed as LED on this page for the 2022 Infiniti Q50. That means the replacement may involve an LED lamp assembly rather than a standard bulb.
Trim and lighting package can change the exact lamp design, especially on premium vehicles like the Q50. A base model and a higher trim may use different housings, connectors, or LED modules even when the lighting position name is the same.
Yes. Checking the installed bulb is one of the best ways to avoid mistakes, especially for interior lights and any position that may vary by market or package. It helps confirm the base type, size, and whether the part is actually replaceable.
You can sometimes do that for certain positions, but only if the housing, connector, and electrical setup support the conversion. For this model, many exterior positions are already listed as LED, so the main concern is matching the exact factory configuration rather than upgrading from halogen.
