Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Map Light Bulb, Trunk or Cargo Area Light
The 2019 Jeep Cherokee uses a mix of LED and replaceable bulb types across its exterior and interior lighting. This page is designed to help you verify bulb sizes by lighting position, so you can quickly match the correct fit for headlights, tail lamps, turn signals, license plate lights, and cabin lights before you buy.
Because trim level, lighting package, market, and body style can change the setup, the same 2019 Jeep Cherokee may not use the same bulb in every location. Checking the bulb chart by position is the safest way to confirm whether your vehicle uses an LED assembly or a serviceable bulb such as 921, 7440A, 2825/98, 214-2, 194NA, or 212-2.
For the best fitment results, compare your Cherokee’s installed bulb or lamp assembly with the chart before ordering, especially if your vehicle has an upgraded lighting package or an aftermarket conversion. Some exterior lights on this model are LED and may not use a simple replaceable bulb, while others do. If you are replacing a halogen-style bulb with LED aftermarket parts, check polarity, bulb depth, and any warning-canceling needs. When in doubt, remove the old bulb and verify the base style and markings first, since trim and equipment differences can affect fitment.
The chart shows the headlight high beam and low beam as LED on this page. That means the headlamp setup is not listed with a standard replaceable halogen bulb size here.
On this page, both the brake light and tail light are listed as LED. In many cases that means the lamp is part of an LED assembly rather than a simple bulb swap.
The front turn signal bulb is listed as 7440A.
The rear turn signal bulb is listed as 7440A.
The back up reverse light bulb is listed as 921.
The license plate light bulb is listed as 2825, 98.
The dome light bulb is listed as 214-2, and the map light bulb is also listed as 212-2 on this page.
The front side marker light bulb is listed as 194NA.
The rear side marker light is listed as LED on this page.
The daytime running light is listed as LED, so it may be part of an LED lamp assembly rather than a standard removable bulb.
Not always. Trim level, lighting package, market, and body style can change the bulb setup, so it is important to verify your specific vehicle before ordering.
Yes, some positions can be converted with aftermarket LED bulbs, but fitment depends on the socket, space, polarity, and whether the original lamp is already an LED assembly. Always check the installed bulb first.
That is because some lighting positions on the 2019 Jeep Cherokee are listed as LED assemblies, while others use serviceable bulb types with standard size designations.
Confirm the exact lighting position, compare the installed bulb or assembly, and verify whether your vehicle has a standard bulb socket or an LED unit. This helps avoid ordering the wrong part.
