
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Stepwell Light Bulb
Used for: Ash Tray Light Bulb
Used for: Dome Light Bulb
Used for: Map Light Bulb, Trunk or Cargo Area Light
This page lists the bulb sizes for the 2011 Jeep Liberty by lighting position, making it easier to confirm the correct replacement before you buy. Whether you are changing a headlight, tail light, license plate light, or interior bulb, the goal is to match the bulb to the exact location on the vehicle.
The 2011 Jeep Liberty uses a mix of exterior and interior bulb types, and some positions may differ depending on trim, market, or lighting package. Use the bulb chart on this page to verify each socket location and avoid guessing based on appearance alone.
For the best fitment results, always compare the bulb in your Jeep Liberty with the listing for that specific position before ordering. Trim level, factory options, halogen versus LED setups, and aftermarket conversions can all affect what is installed. If a previous owner changed the lighting, the bulb may no longer match the original specification, so checking the installed bulb before purchase is the safest approach. This is especially important for exterior lights such as the headlight, turn signal, brake light, and parking light, where the wrong bulb can cause fitment issues or warning problems.
The 2011 Jeep Liberty uses an H13 bulb for both the high beam and low beam headlight positions.
The front turn signal bulb is listed as 3757A for the 2011 Jeep Liberty.
The parking light bulb for the 2011 Jeep Liberty is 3757A.
The rear turn signal bulb is listed as 3757A on the 2011 Jeep Liberty.
Both the brake light and tail light positions use a 3157R bulb on the 2011 Jeep Liberty.
The back up reverse light bulb is 3157 for the 2011 Jeep Liberty.
The front side marker light bulb is 168NA.
The rear side marker light bulb is listed as 3157A.
The license plate light can use either 2825 or 98, depending on the exact setup on the vehicle.
The dome light bulb is 578 for the 2011 Jeep Liberty.
Both the map light and the trunk or cargo area light use a 212-2 bulb.
The stepwell light bulb is 906.
The center high mount stop light is listed as LED on this page, so it may not use a replaceable standard bulb in the same way as the other positions.
Yes. Trim, body style, market, and lighting package can change the exact bulb used in some positions, so it is important to verify the installed bulb and compare it with the chart.
The original bulb type for each position should be matched first. After that, you can choose halogen or LED replacements if they are compatible with the socket, housing, and electrical system.