Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front(Compare to original - Option 1)
Used for: Fog Light Bulb Front(Compare to original - Option 2)
Used for: Headlight Bulb High Beam and Low Beam, Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb, Map Light Bulb
Used for: Side Marker Light Bulb Front, Door Mirror Illumination Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Dome Light Bulb, Trunk or Cargo Area Light, Vanity Mirror Light Bulb
This 2020 Jeep Renegade bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right part the first time. Use it to match common exterior and interior lights such as headlights, fog lights, tail lights, map lights, and license plate lights.
Because trim level, lighting package, market, and body style can change the fitment, the bulb listed for one position may not apply to every 2020 Renegade. Checking the bulb location on the vehicle is the best way to confirm whether your Jeep uses a standard bulb, an LED unit, or a different headlight setup.
For the best fit, compare the bulb in your Jeep Renegade before ordering, especially if you have halogen headlights, HID headlights, or an aftermarket LED conversion. The same model year can use different bulb types for the same lighting position depending on trim or package, and some replacements are sold as direct-fit halogen bulbs while others are LED upgrade options. If you are changing fog lights, headlights, or rear signal bulbs, make sure the new bulb matches the original base and size, and confirm the connector style and physical clearance before purchase.
Most 2020 Jeep Renegade models listed here use H13 bulbs for the high beam and low beam headlight positions. Some versions with HID headlights use D5S bulbs instead, so it is important to confirm which headlight system is installed on your vehicle.
Yes, the bulb chart shows H13 for the combined high beam and low beam headlight setup on many 2020 Renegade models. If your vehicle has HID headlights, the bulb type changes to D5S.
The standard front fog light bulb listed is H11. The chart also shows LED comparison options for some setups, including H11 LED and H16 LED, but those are fitment references and may depend on the original lamp design.
The back up light bulb is listed as 921. This is the bulb size to check when replacing the reverse lights on a 2020 Jeep Renegade.
The 2020 Jeep Renegade license plate light bulb sizes are 168 and 2825. Either size may be listed for the same position, so verify the bulb already installed before buying.
The front turn signal light bulb is listed as 5200. Always confirm the bulb in the socket, since lighting package differences can affect the exact fitment.
The rear turn signal light bulb is listed as 7506 or 7506A. Some listings may also show 7506R, so checking the installed bulb is a good idea before ordering.
The brake light bulb and tail light bulb are both listed as 7506 or 7506R. That means the same bulb family is used for both positions on this model year, depending on the specific lamp assembly.
Several interior positions use 6418 bulbs, including the dome light, courtesy light, trunk or cargo area light, and vanity mirror light. The map light and glove box light are listed as 168 or 2825 bulbs.
The center high mount stop light bulb is listed as LED. In many cases this means the lamp is serviced as an LED unit rather than a simple replaceable halogen bulb.
Not always. Trim level, lighting package, market, and body style can change the bulb type, especially for headlights and fog lights. The page is designed to help you narrow down the correct bulb by lighting position, but the installed part should still be checked for confirmation.
