
PIAA 18803 881 Xtreme White Plus
$66.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(+), Tail Light Bulb Outer
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb, Tail Light Bulb Inner
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb, Tail Light Bulb Inner
Used for: Parking Light Bulb(+), Side Marker Light Bulb Rear(+), Turn Signal Light Bulb Front(+)
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
Used for: Map Light Bulb
This 2012 Kia Soul bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, brake light, map light, or license plate bulb, the goal is to make fitment easier and reduce guesswork.
Bulb sizes on the 2012 Kia Soul can vary by trim, lighting package, market, and body style, so the exact bulb in your vehicle may not always match every listing. Use this page as a position-by-position reference for the most common exterior and interior bulbs found on this model.
For the best fit, compare the bulb type on this page with the bulb already installed in your Soul, especially if your car has factory LED lighting or an aftermarket conversion. Some positions may use LED assemblies rather than replaceable bulbs, and halogen-to-LED upgrades can require the correct base, polarity, and space behind the housing. Trim and package differences can also affect the front turn signal, parking light, fog light, and rear lamp setup, so checking the old bulb before ordering is always the safest step.
The listed high beam headlight bulb for the 2012 Kia Soul is H11B. Always confirm the bulb in your specific vehicle, since lighting equipment can vary by market and trim.
The back up reverse light bulb is 921 on this model. That is the common fitment shown for the 2012 Kia Soul reverse lamp position.
The front fog light bulb listed for the 2012 Kia Soul is 881. If your Soul has fog lights, check the existing bulb and housing before replacing it.
The license plate light bulb is listed as 168 or 917. Both are common wedge-style bulbs used in this position on the 2012 Kia Soul.
The map light bulb is 194 or 7441. This is a common interior bulb size for the front map lamp area.
The dome light bulb is 6461. If your interior lamp has been changed to an LED unit, the replacement method may differ from a standard bulb swap.
Not always. The page shows multiple rear lamp entries, including Tail Light Bulb Outer 2357R, Tail Light Bulb Inner 168 or 917, and LED listings for some versions. Trim and lighting package differences can change the correct bulb.
The brake light bulb is listed as LED for one configuration, and Brake Light Bulb(+) is 2357R for another. This is a good example of why you should verify the exact lamp style on your vehicle before buying.
The rear turn signal light bulb is 1156A. Some versions may have different lamp arrangements, so confirm the installed bulb if your Soul has been modified or has a different market specification.
The front turn signal light bulb is listed as LED in one configuration and Turn Signal Light Bulb Front(+) as 2357A in another. Check your trim and the actual bulb type in the housing.
The parking light bulb is listed as LED in one configuration and Parking Light Bulb(+) as 2357A in another. The correct fit depends on the lighting package and market version of the 2012 Kia Soul.
The front side marker light bulb is 168NA. If your vehicle has an LED side marker assembly, the bulb may not be separately replaceable.
Yes, many owners replace halogen bulbs with LED equivalents, but fitment depends on the socket, polarity, housing depth, and whether the lamp is a sealed LED assembly. Make sure the LED is compatible with the exact bulb position.
Because the 2012 Kia Soul can have trim, package, and market differences that affect bulb choice. Comparing the installed bulb helps confirm the correct base and avoids ordering the wrong part.