
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb(Compare to original - Option 1), Vanity Mirror Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2), Door Mirror Illumination Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2), Door Mirror Illumination Light Bulb
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb
This 2007 Lincoln MKZ bulb size guide helps you verify the correct bulb for each lighting position before you buy. Use it to match the bulb type to the exact location on the car, whether you are replacing a headlight, tail lamp, interior light, or a small exterior marker bulb.
Because the 2007 Lincoln MKZ can use different lighting setups, the bulb chart is organized by position so you can compare the installed bulb with the listing for your vehicle. That makes it easier to find the right fit for halogen, HID, LED, and interior replacement bulbs without guessing.
Fitment can vary by trim, lighting package, market, and body style, so it is smart to confirm what is actually installed on your MKZ before ordering. The low beam may be H11 on halogen-equipped cars or D1S on HID-equipped cars, and some exterior positions may already use LED assemblies rather than a standard replaceable bulb. If you are planning an aftermarket LED conversion, check bulb base style, polarity, housing clearance, and whether the new bulb is compatible with the factory socket and lens. For the best results, compare the old bulb to the chart and verify the part number on the bulb itself whenever possible.
The low beam bulb listed for halogen headlights is H11. Always confirm that your MKZ has halogen housings before ordering, since HID-equipped cars use a different bulb type.
For MKZ models equipped with HID headlights, the low beam bulb is D1S. This is not interchangeable with the halogen H11 setup.
The front turn signal bulb is 3457A. If you are replacing both sides, check the socket condition and make sure the new bulb matches the original base style.
The rear turn signal bulb is 3157A. This is a common dual-filament style used in many rear lamp assemblies, but you should still confirm the exact bulb in your vehicle.
The back up reverse light bulb is 921. If one reverse light is out, it is often a good idea to replace both sides at the same time.
The center high mount stop light bulb is 921. This is the high-mounted brake light at the rear of the vehicle.
The chart lists the brake light bulb as LED. The rear tail light outer and rear side marker positions are also listed as LED, so those locations may be integrated LED assemblies rather than simple replaceable bulbs.
The license plate light bulb is 6418. This is the bulb size to check if your plate lights are dim, flickering, or burned out.
The dome light bulb is 578. The same 578 bulb is also listed for the trunk or cargo area light.
The map light bulb is 3886X. The vanity mirror light bulb is 37. These interior bulbs are different, so it is important to match the correct location.
The glove box light bulb is listed as 194 or 7441. Courtesy lighting has two listed options: 2825 or 98 for one setup, and 37 for another setup, so checking the installed bulb is important.
The front side marker light bulb is 168NA. This bulb is specific to the front marker position and should be matched carefully to the original.
The front fog light bulb is listed as H11 LED or H16 LED. Because fog light setups can vary, confirm the base and housing before choosing an LED replacement.
The chart shows the outer tail light bulb as LED and the inner tail light bulb as 161. That means the rear lighting setup may include both LED and replaceable bulb positions depending on the lamp section.