Used for: Headlight Bulb High Beam and Low Beam
Used for: Daytime Running Light Bulb
The 2020 Mazda CX-30 uses different bulb types depending on the lighting position, trim level, and market, so this page is designed to help you verify the correct bulb size before you buy replacements. Use the listings here to match the bulb by location, whether you are checking the headlights, fog lights, brake lights, turn signals, license plate lights, or interior lamps.
For the 2020 Mazda CX-30, many exterior and interior lights are listed as LED, while the daytime running light bulb is shown as H7 on some applications. Because lighting equipment can vary by body style and package, it is important to confirm the exact bulb by position rather than assuming every CX-30 uses the same setup.
Fitment can vary by trim, lighting package, and market, especially on vehicles that may use LED assemblies on one version and halogen-style service parts on another. If your CX-30 has been modified, or if you are considering an aftermarket conversion, check whether the housing is designed for LED, halogen, or a specific bulb base before ordering. The safest approach is to inspect the installed bulb or the original lamp assembly first, then compare it with the bulb chart on this page so you avoid buying the wrong part.
Not always. Trim level, lighting package, and market can change the bulb type or the entire lamp design, so the correct fitment should be checked by lighting position.
It helps you verify bulb sizes by location, such as headlight, fog light, brake light, turn signal, license plate light, reverse light, and interior light positions.
The page lists the headlight high beam and low beam as LED, D1S. Always confirm the exact setup on your vehicle before buying replacement parts.
The daytime running light bulb is listed as H7 on the available raw fitment list for this page.
No. The front fog light bulb is listed as LED, but trim and market differences can affect the exact lamp design, so verify the installed setup first.
The page includes the tail light bulb, rear turn signal light bulb, rear side marker light bulb, rear fog light bulb, center high mount stop light bulb, and back up reverse light bulb.
Yes, the brake light bulb is listed as LED on this page.
Check the bulb position, the existing bulb type, and whether the lamp is a serviceable bulb or a sealed LED assembly. This is especially important on the 2020 CX-30 because equipment can vary.
Usually no, not unless the housing and electrical setup are designed for that change. Mixing LED and halogen without confirming compatibility can cause fitment or warning-light issues.
Yes. The license plate light bulb and vanity mirror light bulb are both listed as LED on the available fitment data.
The trunk or cargo area light is listed as LED, which helps narrow the replacement search for that specific interior position.
Because the 2020 Mazda CX-30 can use different bulbs in different locations, and some lighting equipment changes with trim or market. Matching by position is the best way to avoid ordering the wrong bulb.
