Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
Used for: Map Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2009 Nissan 370Z by lighting position, so you can match the correct bulb to each exterior or interior lamp before ordering. Because the 370Z can use different lighting setups depending on trim, market, and body style, checking the exact location is the safest way to avoid a mismatch.
For this model year, the bulb chart includes common service points such as the headlight bulb, brake light bulb, tail light bulb, reverse light bulb, license plate light, parking light, turn signals, side markers, and several interior bulbs. Use the position-specific listings on this page to narrow down the right fit for your 2009 Nissan 370Z.
Fitment can vary on the 2009 Nissan 370Z, especially between trims, factory lighting packages, and regional specifications, so always compare the bulb in the car with the chart before buying. Some positions are listed as LED in the chart, while others use standard bulb types, and that distinction matters if your car has been modified or converted with aftermarket LED assemblies. If your 370Z has been upgraded with non-original housings, resist the urge to assume the stock bulb size will still apply; aftermarket conversions can change the required bulb type, base, or clearance. The best practice is to remove the installed bulb, read the marking on the base when possible, and confirm the socket style and physical length before placing an order.
The chart lists D2S for the headlight bulb high beam and low beam on the 2009 Nissan 370Z. Always confirm the installed setup, since lighting packages can differ by market or trim.
The back up reverse light bulb is listed as 921. This is the size shown for the 2009 Nissan 370Z reverse lamp position on this page.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the exact lamp design used on the vehicle.
The parking light bulb is listed as 168 or 917. Check the installed bulb and socket to make sure the replacement matches your specific car.
The front turn signal light bulb is listed as 7444NA. That is the fitment shown for the 2009 Nissan 370Z front signal position.
The rear turn signal light bulb is listed as 7440A. This is the bulb size shown for the rear signal position on the 2009 Nissan 370Z.
The reverse bulb is 921. If your lamp has been changed to an aftermarket unit, verify the socket before ordering a replacement.
The chart lists separate positions for brake light bulb and tail light bulb, and both are shown as LED. Even when the bulb type is the same, the lamp function should still be matched by position.
Both the front side marker light bulb and rear side marker light bulb are listed as LED on this page. Because the chart does not provide a traditional replaceable bulb number, check the lamp assembly before assuming a standard plug-in bulb applies.
The map light bulb is listed as 194 or 7441, the glove box light bulb has two comparison options, 2721 or 74, and the trunk or cargo area light is listed as 158. These are the interior fitments shown on the page.
No. The chart shows several LED positions, but others use standard bulb numbers such as 921, 168/917, 194/7441, 7444NA, 7440A, 2721, 158, and D2S. Always check each lighting position individually.
Because trim, package, and market differences can change the exact fitment on the 2009 Nissan 370Z. Checking the installed bulb helps confirm the correct size, base, and length, especially if the car has been modified or fitted with aftermarket lighting.
