
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front, Cornering Light Bulb
Used for: Fog Light Bulb Front, Cornering Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Dome Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Dome Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
This 2010 Porsche Cayenne bulb size guide is designed to help you verify the correct bulbs by lighting position before you buy replacements. Whether you are changing a headlight, a tail light, or a small interior lamp, matching the bulb to the exact location is the easiest way to avoid fitment mistakes and wasted time.
The 2010 Porsche Cayenne uses a mix of LED and halogen-style bulbs depending on the lamp location, and some lighting equipment can vary by market and body style. Use this page to check the bulb type for each position on the vehicle, from low beam headlights and fog lights to license plate, cargo area, and turn signal bulbs.
Fitment can differ by trim, lighting package, and regional specification, so it is smart to confirm what is actually installed on your Cayenne before ordering. Some positions may use LED assemblies, while others use replaceable bulbs, and aftermarket LED conversions can change the required bulb style or create warning messages if the vehicle expects a different load. If you are unsure, remove the old bulb and compare it to the listing before purchase, especially for headlight, fog light, and interior applications where multiple options may appear in the catalog.
The low beam headlight bulb listed for the 2010 Porsche Cayenne is D1S. This is one of the most important fitment checks on the vehicle, since headlight systems can vary by trim and lighting package.
The front turn signal bulb is 7507. If you are replacing both sides, it is a good idea to compare the old bulb and socket condition at the same time.
Both the rear turn signal light and the back up reverse light use 7506 bulbs on this model year. That makes the rear lamp service a little easier because the same bulb type is listed for both positions.
The license plate light bulb is 6418. This is a common small exterior bulb location, and it is worth checking both lamps together if one has failed.
The dome light bulb and the parking light bulb are listed as 2825 or 98. The same bulb family also appears for the front side marker light on this vehicle.
The front side marker light bulb is 2825 or 98. Because trim and market differences can affect lighting equipment, confirm the installed bulb before ordering if your Cayenne has been modified.
The rear side marker light bulb is listed as LED. On some vehicles this may be part of an LED lamp assembly rather than a simple replaceable bulb, so inspect the lamp design before attempting replacement.
The front fog light bulb and the cornering light bulb are listed with H11 LED or H16 LED options. The correct choice depends on the exact lamp setup installed on the vehicle, so verify the current bulb or housing before buying.
The trunk or cargo area light uses 6411 or 6428. These are interior utility bulbs, and either option may appear depending on the specific lamp assembly.
The brake light bulb and the center high mount stop light bulb are listed as LED. In many cases, LED brake lighting is integrated into the lamp assembly, so replacement may involve the full unit rather than a standard loose bulb.
Not always. Trim level, body style, lighting package, and market-specific equipment can change the bulb type in certain positions. That is why it is best to use the bulb chart by lighting position and verify the installed part on your own vehicle.
You can, but only if the bulb type and housing are compatible. Some aftermarket LED conversions fit physically but may not perform correctly in reflector or projector housings, and some vehicles may need additional parts to avoid flicker or warning lights.