
Philips D4S Standard Authentic Xenon HID Headlight Bulb
$55.50
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Parking Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
This 2013 Subaru BRZ bulb size guide is built to help you verify the correct replacement bulb by lighting position, so you can match the right part to the right socket without guessing. Whether you are replacing a burned-out exterior lamp or checking interior lighting, this page organizes the bulb chart by location for quick reference.
The 2013 BRZ uses a mix of LED and halogen-style bulbs depending on the lamp position, and some fitment details can vary by market, trim, or lighting package. Use the bulb listings here as a position-based guide for the most common factory applications on the BRZ, including headlights, turn signals, marker lights, license plate lights, and interior bulbs.
Before buying replacements, confirm the exact lamp type installed on your car, especially if it has been modified with aftermarket lighting or converted from halogen to LED in any area. Trim and package differences can affect fitment, and some bulbs may look similar while using different bases or output requirements. It is always smart to remove the old bulb and compare it with the replacement before ordering, especially for the 2013 Subaru BRZ where the lighting setup can vary by market and body style.
The listed headlight bulb for both high beam and low beam on the 2013 Subaru BRZ is D4S. Always confirm the installed setup before purchase, since headlight systems can be affected by market or previous modifications.
The back up reverse light bulb is 921 on the 2013 Subaru BRZ. This is one of the most common bulbs to replace when a reverse lamp stops working.
The front turn signal light bulb listed for the 2013 BRZ is 7440A. Make sure you match the bulb base and not just the shape, since similar-looking bulbs may not fit correctly.
The rear turn signal light bulb is also listed as 7440A for the 2013 Subaru BRZ. If one side flashes faster after replacement, check the bulb type and installation first.
The front side marker light bulb is 194NA. This position-specific bulb helps keep the side marker lamp working properly and should be matched carefully to the socket.
The rear side marker light bulb is 168NA on the 2013 BRZ. This is a different fitment from the front side marker, so do not assume both ends use the same bulb.
The license plate light bulb is listed as 168 or 917. Either size may be shown for this position, so verify the existing bulb before ordering replacements.
The dome light bulb for the 2013 Subaru BRZ is DE3175. Interior bulbs can be easy to overlook, but this one is important for cabin lighting.
Yes, the chart lists the center high mount stop light, brake light, and tail light bulbs as LED. Because these are LED assemblies, replacement may involve the lamp unit rather than a simple standard bulb swap.
The daytime running light bulb is listed as LED on the 2013 Subaru BRZ. Since it is an LED application, check the exact lamp assembly before replacing anything.
The trunk or cargo area light bulb is 168 or 917. This is the same bulb family also used in several other interior and license plate positions on the BRZ.
The interior door light bulb is listed as 168 or 917. If your door light is dim or out, confirm the bulb style and socket condition before replacing it.