
Sylvania White Mini Bulb
$14.75
Buy on Amazon →
Used for: Glove Box Light Bulb, Interior Door Light Bulb
Used for: Glove Box Light Bulb, Interior Door Light Bulb
This page covers bulb fitment for the 2015 Audi A8 and is organized by lighting position so you can quickly verify the correct bulb type for each exterior and interior lamp. Because the A8 was offered with different lighting packages depending on market and trim, checking the exact location is the best way to narrow down the right replacement before you buy.
On this year page, you can compare common lighting points such as the low beam, high beam, daytime running light, brake light, turn signal, reverse light, license plate light, and cabin bulbs. Many of the listed positions on the 2015 Audi A8 use LED lighting, while a few interior locations use 2825/98-style bulbs, so matching the bulb to the specific socket matters.
Fitment can vary by trim, body style, and lighting package, so a bulb listed for one 2015 Audi A8 may not apply to every car in every market. Some versions use factory LED assemblies instead of replaceable halogen bulbs, and some owners may have aftermarket conversions that change the bulb type or connector. Before ordering, confirm the installed bulb by checking the old part, the owner’s manual, or the housing itself, especially if you are replacing a headlight, fog light, or interior lamp. If your car has been modified, verify compatibility carefully so the new bulb matches both the electrical connection and the physical size.
Yes, many exterior lighting positions on the 2015 Audi A8 are listed as LED, including the low beam, high beam, daytime running light, brake light, tail light, turn signals, license plate light, and reverse light. Exact fitment can still vary by package and market.
Not necessarily. This page separates low beam and high beam by lighting position, and both are listed as LED. Always check the specific headlamp function before replacing anything.
The glove box light and interior door light are listed with 2825, 98 bulb types. Other interior positions on this page, such as the dome light, map light, vanity mirror light, trunk or cargo area light, and stepwell light, are listed as LED.
Usually no. If the vehicle uses a factory LED module or LED assembly, a standard halogen bulb will not be a direct replacement. You need to match the original lighting design and connector type.
No. Trim level, lighting package, body style, and market can change bulb fitment. The safest approach is to verify the exact lighting position on your specific car before ordering parts.
Confirm that your car uses the same lamp housing and connector style, then verify whether the bulb is LED or a replaceable bulb type. On this page, the license plate light bulb is listed as LED.
They are listed separately on this page, even though both front and rear turn signal positions are shown as LED. It is best to check the exact location rather than assume they are interchangeable.
Look for non-original bulbs, adapters, resistors, or modified housings. If the lighting has been converted, the original bulb listing may not match what is currently installed.
Yes. The back up reverse light bulb position is included on this page and is listed as LED. Use the position name to match the correct lamp on the vehicle.
Those are the bulb types listed for the glove box light and interior door light positions. They are included because those locations do not use the same LED listing as many of the other lamps on the car.
Yes. Even on the same year and model, installed bulbs can differ by market, trim, or prior repairs. Checking the bulb in the car is the best way to avoid ordering the wrong part.
It is a strong starting point, but you should still confirm the exact lamp position and your vehicle’s equipment level. Some lighting functions may be integrated into LED modules rather than serviced as a simple bulb swap.