Used for: Fog Light Bulb Rear, Back Up Reverse Light Bulb
Used for: Glove Box Light Bulb
This page for the 2023 Audi SQ5 helps you verify bulb sizes by lighting position, so you can match the correct replacement before you buy. Because Audi uses LED lighting on most exterior and interior locations on this model, it is important to check the exact lamp position rather than assuming one bulb fits every light.
Use this guide to compare the front, rear, and interior lighting points on your SQ5, including headlights, fog lights, brake lights, turn signals, license plate lights, and cargo-area lighting. The bulb chart is organized to make replacement easier and to reduce the chance of ordering the wrong part.
Fitment can vary by trim, lighting package, market, and body style, so always confirm the installed bulb or assembly on your specific vehicle before purchasing. The 2023 SQ5 is heavily LED-equipped, but some locations still use replaceable bulbs such as 921 for the back-up reverse light and rear fog light, and 2825 for the glove box light. If your vehicle has had aftermarket LED conversions or previous repairs, the installed parts may not match the original equipment listing. Checking the existing bulb, connector style, and housing design before ordering is the safest way to avoid compatibility issues.
Yes. The 2023 Audi SQ5 uses LED lighting for many exterior and interior functions, including the headlights, fog lights, brake lights, daytime running lights, license plate lights, and several marker lights.
Different lighting functions on the SQ5 use different lamp types and housings. Listing bulbs by position helps you confirm the correct fit for each area, such as low beam, high beam, rear turn signal, or cargo-area light.
The back-up reverse light bulb is listed as 921.
The rear fog light bulb is listed as 921.
The glove box light bulb is listed as 2825.
The chart lists the headlight high beam and low beam lighting as LED on the 2023 Audi SQ5. In many cases, that means the light source is integrated into the lamp assembly rather than a simple service bulb.
No. The front fog light is listed as LED, so you should match the LED-equipped setup or the correct assembly for your vehicle rather than assuming a halogen bulb will fit.
Yes. Trim, lighting package, market, and body style can change the exact lighting setup, so the bulb chart should be used as a guide and verified against the vehicle in front of you.
Check the installed bulb or assembly, the connector shape, and the housing design. It is also smart to confirm whether the light is a replaceable bulb or an integrated LED unit.
Yes. Aftermarket conversions can alter the original setup, especially if a previous owner changed a bulb type or modified the housing. Always inspect the installed part before buying replacements.
Yes. The chart lists the license plate light, front and rear side marker lights, and trunk or cargo-area light as LED.
Start with the exact light position you need, confirm the bulb type listed for that position, and then compare it with the bulb currently installed in your vehicle. This is the most reliable way to get the correct fit.
