Audi TT 2022 Bulb Size

Not always. Trim level, lighting package, market, and body style can affect the exact bulb setup on the 2022 Audi TT, so it is best to verify each lighting position rather than assume every car is identical.

The page shows LED for the fog light front, high beam headlight, low beam headlight, daytime running light, parking light, tail light, brake light, front and rear turn signals, license plate light, back up reverse light, center high mount stop light, cornering light, and front and rear side marker lights.

Several interior and utility locations are listed as 2825 bulbs, including the glove box light, trunk or cargo area light, and interior door light bulb where equipped.

The chart lists both low beam and high beam as LED, which often means the light source is part of an LED assembly rather than a simple plug-in halogen bulb. Check the housing before purchase to confirm whether your specific car uses a serviceable bulb or a sealed LED unit.

Use the lighting position on the page and compare it to the bulb installed in your car. The license plate light is listed as LED, so the replacement may be an LED module or integrated assembly rather than a traditional replaceable bulb.

Yes, in some positions you can, but fitment depends on the socket, polarity, and whether the car monitors bulb load. Aftermarket LED conversions may need additional parts to prevent flickering, error messages, or uneven brightness.

A warning can happen if the replacement bulb draws less power than the original, is installed backward, or does not match the factory lighting system. This is more common with aftermarket LED conversions than with direct factory-style replacements.

The glove box light is listed as a 2825 bulb. If your glove box lamp is out, confirm the installed bulb size and base before ordering a replacement.

The page lists both dome light and map light as LED, but that does not always mean they use the same exact service part. Check the specific lamp location and housing style before buying a replacement.

Both front and rear turn signal light bulbs are listed as LED on this page. Even so, the physical lamp design can differ, so confirm the position and fitment before ordering.

Inspect the existing bulb or lamp assembly, match it to the position listed on the page, and confirm whether the car has factory LED lighting or a serviceable bulb. This is the best way to avoid ordering the wrong part.