
Sylvania White Mini Bulb
$14.75
Buy on Amazon →
Used for: Glove Box Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
The 2019 Audi TTS uses a mix of LED exterior lighting and a few small incandescent interior bulbs, so it helps to verify bulb sizes by lighting position instead of guessing from the model name alone. This page is designed to help you match the correct bulb for each location on the car, including headlights, tail lights, turn signals, reverse lights, and cabin lamps.
Because trim and lighting equipment can vary by market and body style, the exact bulb setup on a 2019 Audi TTS may not be identical on every car. Use the bulb chart for the specific light position you are replacing, and compare it with the bulb already installed whenever possible before ordering parts.
For fitment, always check whether your TTS has factory LED lighting or a halogen-style replacement setup, since the bulb type can change with trim, package, or previous modifications. This is especially important if the car has been converted with aftermarket LED bulbs, resistors, or housings, because the listed bulb position may not tell the whole story. Before buying, remove the existing bulb and confirm the base style, connector, and physical size so you avoid returns and warning-light issues. If you are replacing an exterior LED assembly rather than a simple bulb, the correct fix may be a complete module or housing instead of a standard bulb swap.
On this page, the listed exterior positions for the 2019 Audi TTS are mostly LED, including the low beam, high beam, fog light, daytime running light, parking light, tail light, brake light, turn signals, license plate light, side markers, cornering light, and reverse light. That means many exterior repairs involve checking the LED unit or assembly rather than replacing a traditional replaceable bulb.
Yes, the bulb chart for this year and model shows LED for both the headlight low beam and headlight high beam positions. If one of these stops working, you may need to inspect the LED module, housing, wiring, or control components rather than a standard halogen bulb.
Yes. The front fog light position is listed as LED for the 2019 Audi TTS. If the fog light is out, verify the complete light unit and not just a removable bulb.
The glove box light is listed as 2825. This is one of the few interior positions on the page that uses a replaceable incandescent bulb instead of LED.
The trunk or cargo area light is listed as 2825 on the 2019 Audi TTS. If the light is dim or burned out, replacing it with the same 2825 bulb is the safest fitment choice.
The interior door light bulb is listed as 2825, and it may be optional depending on the car’s equipment. Check the installed bulb before ordering, since some trims or markets may differ.
Yes, the dome light and map light positions are listed as LED. These are typically integrated cabin lighting units, so replacement may involve the LED assembly rather than a standard bulb.
The bulb chart shows LED for both the front turn signal and rear turn signal positions on the 2019 Audi TTS. Even though both are LED, the actual parts can still differ by location, so match the specific position before purchasing.
First confirm the exact light position, then compare the installed bulb or module with the chart. Check the connector shape, mounting style, and whether the light is a replaceable bulb or an integrated LED unit. This is the best way to avoid buying the wrong part.
Sometimes, but it depends on the location. Many exterior lights on the 2019 Audi TTS are factory LED and may not accept a simple bulb swap. Aftermarket conversions can cause fitment issues, warning messages, or beam pattern problems, so it is important to verify compatibility before changing anything.
Audi may use different lighting equipment by market, trim, or option package. That means one 2019 TTS can have a slightly different bulb setup than another. Always use the bulb position as your starting point, then confirm the actual bulb on the vehicle before buying replacements.