
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
This 2009 BMW M3 bulb guide helps you verify the correct bulb size by lighting position before you buy replacement bulbs. Because the M3 can vary by market, trim, body style, and lighting package, it is important to match the bulb to the exact lamp location on the car rather than relying on a generic fitment list.
For the 2009 BMW M3, the listed front fog light bulb options are H11 LED and H16 LED, and the headlight high beam and low beam listing shows D1S. Use this page as a quick reference when replacing exterior bulbs so you can compare the bulb type with the lamp on your vehicle and avoid ordering the wrong part.
Fitment can differ depending on trim, package, and whether the car has factory xenon or other lighting equipment, so always confirm what is installed on your specific BMW before purchasing. If you are considering LED replacements, remember that an LED bulb may fit physically but still need the correct base, beam pattern, and housing compatibility to work well. Aftermarket conversions can also change brightness, color, and warning behavior, so checking the existing bulb and the lamp assembly first is the safest way to avoid surprises. When in doubt, remove the installed bulb and compare it directly before ordering replacements.
The listed front fog light bulb options for the 2009 BMW M3 are H11 LED and H16 LED, depending on the vehicle’s lighting setup and market.
The headlight high beam and low beam listing for the 2009 BMW M3 shows D1S.
BMW lighting can vary by market, trim, and body style, so the fog light bulb type may differ between vehicles that are all called 2009 M3s.
Check the bulb currently installed in the lamp, compare the base and connector, and match it to the bulb type shown for that lighting position on the page.
Possibly, if the LED bulb matches the correct base and fits the housing properly. You should also confirm that the beam pattern and clearance work in your fog light assembly.
Not necessarily. The page lists D1S for the headlight high beam and low beam, but lighting equipment can vary by market and package, so it is best to verify your specific car.
Yes. Trim, package, and body style can affect which bulbs are used, especially on vehicles with different factory lighting setups.
Check the installed bulb and the actual lamp hardware first. Aftermarket conversions may use different bulb types, adapters, or ballasts than the original factory setup.
No. Year and model are a good starting point, but you should always verify the bulb by lighting position and compare it with what is installed on your vehicle.
No. Fog light bulbs and headlight bulbs serve different lamp positions and use different bulb types, so they should not be swapped.
Identify the exact lamp position, confirm the installed bulb type, and replace it with the same base and compatible specification for that location.
It helps prevent buying the wrong part, especially on a car like the 2009 BMW M3 where lighting can vary by market, trim, and previous modifications.