
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front(Compare to original - Option 1)
Used for: Fog Light Bulb Front(Compare to original - Option 1)
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(with adaptive lighting)
Used for: Brake Light Bulb(without adaptive lighting)
Used for: Parking Light Bulb(with halogen headlights), Glove Box Light Bulb
Used for: Parking Light Bulb(with halogen headlights), Glove Box Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb
Used for: Vanity Mirror Light Bulb
Used for: Vanity Mirror Light Bulb
This 2012 BMW X3 bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, tail light, or small interior lamp, using the correct fitment saves time and avoids returns.
The 2012 BMW X3 can use different bulb types depending on trim, lighting package, and market. This page organizes the available bulb sizes by location to make it easier to identify the right part for your specific X3.
Fitment can vary between halogen and HID-equipped models, and some exterior lamps also differ if the vehicle has adaptive lighting or a specific option package. Aftermarket LED conversions may fit physically but still need the correct base, beam pattern, and electrical compatibility to work properly. Before ordering, check the bulb already installed in your BMW X3 and compare it with the listing for that exact lighting position, especially for fog lights, parking lights, brake lights, and headlights.
The listed headlight bulb for both high beam and low beam is D1S. This applies to the available bulb chart for this 2012 BMW X3 and is typically associated with HID headlight setups.
The front turn signal bulb is 7507. If you are replacing only one side, it is still a good idea to compare both sides for color and output.
The rear turn signal bulb is 7506. This is separate from the brake light bulb and should be matched by position, not just by appearance.
The back up reverse light bulb is 921. This bulb is used for the rear white reverse lamps.
The license plate light bulb is LED on this page. Because LED lighting can vary by assembly, it is best to confirm the exact lamp style before replacing the unit.
Yes. For models with HID headlights, the parking light bulb is listed as LED. For models with halogen headlights, the parking light bulb is listed as 2825 or 98.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the original setup. Check the existing bulb and connector before ordering an LED replacement.
The brake light bulb depends on whether the vehicle has adaptive lighting. Without adaptive lighting, the bulb is 7506R. With adaptive lighting, the bulb is 64136.
The glove box light bulb is 2825 or 98. This is a small interior bulb and should be matched carefully because similar-looking bulbs can have different bases.
The vanity mirror light bulb is 6411 or 6428. These are interior bulbs and may vary slightly by trim or mirror design.
The courtesy light bulb is 6418. This bulb is used for interior courtesy lighting and should be checked against the installed bulb if your X3 has a different trim package.
Yes. The daytime running light bulb is listed as LED, and the rear side marker light bulb is also listed as LED. These positions may be integrated differently depending on the lighting package.
Yes. That is one of the best ways to avoid fitment problems on a 2012 BMW X3, especially because trim, body style, and lighting package can change the correct bulb choice.