Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Dome Light Bulb
Used for: Dome Light Bulb
The 2021 Buick Enclave uses a mix of LED and halogen-style bulb listings depending on the lighting position, so this page helps you verify bulb sizes by location before you buy replacements. Whether you are changing an exterior signal light, an interior map light, or a cargo-area lamp, matching the bulb to the correct position is the easiest way to avoid fitment mistakes.
For the 2021 Buick Enclave, many forward and rear lighting functions are listed as LED, while a few serviceable bulbs still use common replaceable sizes such as 921, 168/917, 194/7441, and 7444NA. Because trim level, lighting package, market, and body style can affect the exact setup, it is smart to confirm the bulb position on your vehicle and compare it with the chart before ordering.
Fitment can vary on the 2021 Buick Enclave, especially between trims and lighting packages, so do not assume every bulb is the same across all versions. Some positions are factory LED assemblies, which may require replacing the complete unit rather than a simple bulb, while others use standard replaceable bulbs. If you are considering an aftermarket LED conversion for a halogen location, check polarity, connector style, and space inside the housing. It is also a good idea to remove the installed bulb and compare the number printed on the base before purchasing, since the same model year can use different bulbs in different markets or configurations.
The back up reverse light bulb is listed as 921 for the 2021 Buick Enclave.
The license plate lights use 168 or 917 bulbs, depending on the exact setup.
The dome light bulb is listed as 194 or 7441.
The front turn signal light bulb is listed as 7444NA on the available bulb chart.
The headlight high beam and low beam are listed as LED, so they are not shown as standard replaceable halogen bulbs on this page.
The chart shows LED listings for the headlight high beam and low beam, center high mount stop light, brake light, parking light, tail light, daytime running light, rear turn signal light, front and rear side marker lights, and stepwell light.
Only if the lighting position uses a serviceable bulb. Factory LED assemblies may not accept a simple bulb swap and may need the full lamp module replaced.
Check the bulb position on the vehicle, compare it with the bulb chart, and if possible remove the installed bulb to read the number printed on the base.
Not always. Trim level, lighting package, market, and body style can change the bulb setup, so the correct fitment should be verified by position.
The chart lists the map light bulb and trunk or cargo area light as LED, so they are not shown with a standard replaceable bulb number here.
The rear turn signal is listed as LED, so the replacement method may differ from a traditional bulb. Check whether your vehicle has a serviceable bulb or a sealed LED assembly.
Yes. The page is meant to help verify bulb sizes by lighting position, but you should still confirm your exact vehicle because market differences can affect fitment.
