
SEALIGHT H10 LED Fog Light Bulbs or DRL, 12000LM 9140 914...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Dome Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Dome Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Glove Box Light Bulb, Interior Door Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2011 Cadillac CTS bulb size guide is designed to help you verify the correct bulbs by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, a brake light, or a small interior lamp, this page organizes the common bulb locations for the CTS in a simple, practical way.
The 2011 Cadillac CTS was offered with different trims, body styles, and lighting packages, so bulb fitment can vary by market and equipment. Use the bulb chart on this page to match the bulb to the exact location on your vehicle, especially if your CTS has factory LED lighting or an optional HID setup.
For best results, compare the bulb position on your car before ordering, since trim and package differences can change the correct fitment. Some 2011 CTS models use halogen bulbs in certain spots, while others may have LED or HID-related lighting that requires a different part number or assembly. If you are considering an aftermarket LED conversion, make sure the bulb base, depth, and connector style match the original housing, and check for beam pattern or warning-light issues. When possible, remove the installed bulb and confirm the markings on the base before buying replacements, especially for exterior lights that may differ between sedan and wagon configurations.
The low beam headlight bulb listed for the 2011 Cadillac CTS is H11 on many setups. Some versions may use a D1S system for combined high and low beam HID lighting, so check your existing headlight type before ordering.
The high beam bulb size listed is H9 for many CTS configurations. If your car has a D1S HID setup, the headlight arrangement may differ from the standard halogen layout.
Front fog light fitment can vary on the 2011 Cadillac CTS. The listed options include 9145 LED, 9140 LED, H11 LED, H16 LED, and H8 LED, so confirm the exact lamp and housing before purchase.
The front turn signal bulb listed for the 2011 Cadillac CTS is 12272NA. Always verify the socket and lens style, since front lighting can differ by trim or market.
The rear turn signal bulb is listed as LED on this page. Because the rear lighting may be integrated differently depending on the CTS body style and package, it is important to match the existing lamp assembly.
The brake light bulb and tail light bulb are both listed as LED for the 2011 Cadillac CTS. These may be part of an integrated rear lamp assembly rather than a simple replaceable bulb in some versions.
The back up reverse light bulb is listed as LED. Check the rear lamp assembly carefully, because some CTS trims use LED modules that are not interchangeable with standard halogen bulbs.
The license plate light bulb sizes listed are 2825 and 98. These are common small wedge-style bulbs used in several exterior courtesy applications.
The dome light bulb is listed as 2825 and 98. Interior lighting can vary with equipment level, so confirm the bulb shape before replacing it.
The map light bulb is listed as PC175, while the glove box light bulb is 906. The interior door light bulb is also 906 on this page.
The trunk or cargo area light bulb listed for the 2011 Cadillac CTS is 211-2. This is a useful bulb to check if the cargo lamp has gone dim or stopped working.
Before converting a 2011 Cadillac CTS bulb location to LED, confirm that the bulb base, polarity, and physical size fit the housing. Some positions work well with LED upgrades, while others may need resistors, adapters, or a different assembly to avoid flicker or warning messages.