Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Courtesy Light Bulb, Interior Door Light Bulb
Used for: Courtesy Light Bulb, Interior Door Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This page helps you verify the bulb sizes for the 2014 Cadillac Escalade by lighting position, so you can match the correct replacement before you buy. Because the Escalade could be equipped with different lighting setups, checking each lamp location is the safest way to avoid ordering the wrong bulb.
For the 2014 Cadillac Escalade, the chart includes exterior and interior bulbs such as LED brake, tail, rear turn signal, rear side marker, and center high mount stop light positions, plus common interior and utility lights. Use the bulb list below to confirm the correct fit for your specific vehicle and lighting package.
Fitment can vary by trim, package, market, and body style, so always compare the bulb position on your vehicle with the chart before replacing anything. This is especially important on models with LED headlights, HID headlights, or factory lighting upgrades, since the correct bulb type can differ from halogen-equipped versions. If you are considering an aftermarket LED conversion, check the socket style, polarity, and available space inside the housing. When possible, remove the installed bulb first and verify the marking on the base before purchasing a replacement.
For Escalade models equipped with LED headlights, the chart lists the high beam and low beam bulb as LED. Always confirm your headlight type before ordering, since the HID-equipped version uses a different bulb.
For models with HID headlights, the chart lists the high beam and low beam bulb as D1S. This applies to the HID setup, not the LED headlight version.
The daytime running light bulb is listed as 5201. Some Escalade trims may have different front lighting packages, so verify the lamp position before replacement.
The rear turn signal light bulb is listed as LED. Since the rear lighting assembly can vary by market or package, confirm the exact lamp location on the vehicle.
The front turn signal light bulb is listed as 3457A. This same bulb size is also listed for the parking light position on this vehicle.
The parking light bulb is listed as 3457A. If you are replacing both front signal and parking lamps, check each socket individually to make sure the correct bulb is installed.
The back up reverse light bulb is listed as 7440. This is a common replacement item, but it is still a good idea to compare the old bulb before buying.
The license plate light bulb is listed as 2825, 98. Either of those bulb references may appear depending on the replacement source, so match the socket and installed bulb.
Both the dome light and map light are listed as 212-2. These interior bulbs are often replaced together, so checking both locations can save time.
The glove box light bulb is listed as 194, 7441. If your glove box light is dim or out, confirm the bulb base and size before ordering.
The trunk or cargo area light is listed as 578. This bulb is commonly used in cargo lighting applications, but the installed bulb should still be checked first.
Not always. Trim level, lighting package, market, and body style can change the bulb list, especially for exterior lighting and headlamp systems. Use the chart as a guide and verify the actual lamp on your vehicle.
