
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear(with halogen headlights)
Used for: Brake Light Bulb(with halogen headlights)
Used for: License Plate Light Bulb, Tail Light Bulb(with halogen headlights)
Used for: License Plate Light Bulb, Tail Light Bulb(with halogen headlights)
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear(with halogen headlights)
Used for: Turn Signal Light Bulb Front
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
This 2018 Chevrolet Camaro bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Because Camaro lighting can vary by trim, body style, and headlight package, it is important to confirm the exact bulb for each lamp instead of assuming one size fits every version.
Use this page as a quick reference for exterior and interior lighting on the 2018 Camaro, including headlights, tail lights, turn signals, side markers, license plate lights, and cabin bulbs. The listings below are organized by location to make replacement easier and to reduce the chance of ordering the wrong bulb.
Fitment can differ between Camaro trims and lighting packages, especially when comparing halogen and HID-equipped models. For example, some positions use LED assemblies, while others use replaceable bulbs such as H11, 9005, D3S, 7440, 7440A, 7440R, 194NA, 194, 7441, 2825, or 98 depending on the lamp location. If you are converting to aftermarket LED bulbs, make sure the replacement is compatible with the vehicle’s socket, polarity, and any required load or error-canceling hardware. Before placing an order, check the bulb currently installed in the car and compare it with the chart, since market differences and prior modifications can change the correct fitment.
The 2018 Chevrolet Camaro uses H11 low beam bulbs on halogen headlight setups. Camaro models with HID headlights use D3S for the headlight bulb setup instead of separate halogen low beams.
The high beam bulb size is 9005 on halogen-equipped models. If your Camaro has HID headlights, the headlight system uses D3S rather than a separate halogen high beam bulb.
The front turn signal bulb is 7440A.
Rear turn signal fitment depends on the headlight package. Camaro models with halogen headlights use 7440, while models with HID headlights use an LED rear turn signal lamp.
For halogen headlight models, the brake light bulb is 7440R. Camaro versions with HID headlights use an LED brake light lamp.
Tail light fitment also depends on the lighting package. Halogen headlight models use 2825 or 98 for the tail light bulb, while HID headlight models use an LED tail light lamp.
The back up reverse light bulb is 7440.
The license plate light bulb can be 2825 or 98.
The front side marker bulb is 194NA. Rear side marker fitment depends on the lighting package: halogen headlight models use 194NA, while HID headlight models use an LED rear side marker lamp.
Yes, the dome light, map light, and center high mount stop light are listed as LED on this page. The trunk or cargo area light may use 194 or 7441 depending on the specific setup.
Check the headlight assembly on the car and compare it to the bulb chart. Halogen setups use H11 low beams and 9005 high beams, while HID setups use D3S and have different bulb requirements for several rear and exterior lamps.
Yes. The safest approach is to inspect the installed bulb and compare it with the chart, especially on a 2018 Camaro where trim, package, and market differences can change fitment.