
PIAA 18880 880 Xtreme White Plus
$58.60
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb(Compare to original - Option 1)
Used for: License Plate Light Bulb(Compare to original - Option 2), Courtesy Light Bulb(Compare to original - Option 1), Glove Box Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb
Used for: Check Engine Light Bulb, High Beam Indicator Light Bulb, Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb(Compare to original - Option 1)
Used for: Dome Light Bulb(Compare to original - Option 2)
Used for: Engine Compartment Light Bulb
Used for: Instrument Panel Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the bulb sizes for the 2002 Chevrolet Silverado 1500 by lighting position, so you can match the correct replacement before you buy. Whether you are replacing a headlight, tail light, interior lamp, or dash indicator, checking the exact socket location is the easiest way to avoid ordering the wrong bulb.
The 2002 Silverado 1500 uses a mix of exterior, interior, and instrument bulbs, and some fitments can change with trim, body style, or lighting package. Use the bulb chart on this page to confirm each position separately, especially if your truck has factory fog lights, daytime running lights, or different cargo and courtesy light setups.
For the best fit, compare the bulb number on the chart with the bulb currently installed in your truck before purchasing. Trim and package differences can affect certain lamps, and aftermarket LED conversions may require a different bulb type, added load resistors, or a compatible flasher to work correctly. If you are upgrading from halogen to LED, make sure the new bulb matches the socket, beam pattern, and space available behind the housing, since some replacements are physically larger than the original. When in doubt, remove one bulb, read the number on the base, and verify it against the chart before ordering a full set.
The listed low beam bulb size is 9006, and the high beam bulb size is 9005. These are separate bulbs, so check both if you are replacing the full headlight set.
The front turn signal bulb is listed as 3157A. The parking light bulb is also 3157A on this page, so confirm the socket position before replacing.
The rear turn signal bulb is 3157R, and the tail light bulb is also 3157R. That makes it important to confirm whether you are replacing the stop/tail lamp or another rear lamp position.
The brake light bulb is listed as 3157R. On many trucks, the same bulb family is used for multiple rear lighting functions, so position matters.
The center high mount stop light bulb is 921. If your third brake light has been dim or intermittent, this is the bulb to check first.
The map light bulb is 168. Dome light fitment can vary on this page, with 578 and 211-2 listed for different dome light options, so verify the installed bulb before ordering.
The glove box light bulb is 194, and the ash tray light bulb is 161. These are small interior bulbs, so it helps to compare the old bulb directly before replacement.
Two license plate light options are shown on this page: 194 and 97. Because the notes mention compare-to-original options, check the bulb currently in your truck to confirm which one matches your setup.
The front fog light bulb is listed as 880. If your truck was not equipped with factory fog lights, this position may not be present.
The daytime running light bulb is listed as 4114. Since DRL setups can vary by market and package, it is smart to verify the installed bulb before buying replacements.
The instrument panel light bulb is PC195. Several indicator positions use PC74, including the turn signal indicator, high beam indicator, parking brake indicator, and check engine light.
Yes. Trim, body style, and lighting package can affect some bulbs on the 2002 Silverado 1500, especially interior and exterior options. Always match the bulb to the exact position on your truck.
Halogen bulbs are the closest direct replacement to the original setup, while LED upgrades can improve brightness and lifespan if they are compatible with the socket and housing. For LED conversions, check fitment, polarity, and any resistor or flasher requirements.
The safest method is to remove the installed bulb, read the number on the base, and compare it with the chart for your exact lighting position. This is especially useful when a truck has been modified or has replacement housings.