
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Daytime Running Light Bulb, Turn Signal Light Bulb Front
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Dome Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you find the right bulb sizes for the 2013 Chrysler 200 by lighting position, so you can match the correct bulb to the exact lamp on the car. Whether you are replacing a headlight, tail light, license plate light, or interior bulb, checking the location first makes it easier to confirm fitment before you buy.
The 2013 Chrysler 200 uses a mix of LED and traditional bulb types depending on the lamp position, and some lighting items can vary by trim, body style, or market. Use the bulb chart on this page as a quick reference for the most common exterior and interior lighting points on this model, including headlights, fog lights, reverse lights, and cabin bulbs.
For best results, compare the bulb size on this page with the bulb already installed in your vehicle before ordering, especially if your 2013 Chrysler 200 has a different trim level or lighting package. Some positions may use halogen-style bulbs, while others may be factory LED, and aftermarket LED conversions can change the required fitment or connector style. If you are upgrading from halogen to LED, check beam pattern, polarity, and space inside the housing, since not every LED replacement will fit or perform the same way. When in doubt, remove the old bulb and verify the base, wattage, and shape before purchase.
The 2013 Chrysler 200 uses a 9012 bulb for both the high beam and low beam headlight positions listed on this page.
The front turn signal bulb is listed as 3157A for the 2013 Chrysler 200.
The daytime running light bulb is listed as 3157A on the 2013 Chrysler 200.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the specific setup.
The back up reverse light bulb is listed as 921 for the 2013 Chrysler 200.
The license plate light bulb is listed as 2825 or 98.
The front side marker light bulb is listed as 2825 or 98.
The rear side marker light is listed as an LED bulb on this page.
Yes, the bulb chart on this page lists the tail light bulb and brake light bulb as LED.
The center high mount stop light bulb is listed as LED.
The dome light bulb is listed as 578.
The trunk or cargo area light bulb is listed as 567.
The map light bulb is listed as 212-2.
Yes. Trim, lighting package, body style, and market can affect bulb fitment, so it is smart to verify the installed bulb before ordering.