
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2010 Dodge Dakota bulb size guide helps you verify the correct bulb by lighting position, so you can replace a failed lamp without guessing. Whether you are changing a headlight, tail light, license plate light, or interior bulb, the chart below is organized to make fitment checks faster and easier.
Bulb sizes on the 2010 Dodge Dakota can vary by trim, body style, and lighting package, so it is smart to match the bulb to the exact location on the truck. Use this page as a reference for common exterior and interior lighting points, including headlamps, marker lights, brake lights, and cabin bulbs.
For the best fitment results, compare the listed bulb size with the bulb already installed in your Dakota before buying replacements. Trim and package differences can affect some lamp applications, and aftermarket LED conversions may require different fitment, polarity, or load considerations than factory halogen bulbs. If you are upgrading from halogen to LED, make sure the replacement is compatible with the housing and local lighting rules. Even when the chart lists a standard size, checking the original bulb is the safest way to avoid ordering the wrong part.
The 2010 Dodge Dakota uses an H13 bulb for both the high beam and low beam headlight positions.
The front turn signal bulb size is 3157A.
The front parking light bulb size is 3157A.
The front side marker light uses a 3157A bulb.
The rear side marker light bulb size is 168NA.
The rear turn signal bulb size is 3057.
The brake light bulb size is 3057R.
The tail light bulb size is 3057R.
The backup reverse light bulb uses a 3157 bulb.
The center high mount stop light bulb size is 921.
The license plate light uses 168 or 917 bulbs.
The dome light bulb size is 578.
The map light bulb size is 194 or 7441.
The glove box light bulb size is 194 or 7441.
The trunk or cargo area light uses a 912 bulb.
Not always. Trim level, body style, and lighting package can change certain bulb applications, so it is best to verify the exact position on your truck.
Yes, many positions can be converted to LED, but fitment, brightness, polarity, and load behavior can differ from the original halogen bulbs.
Yes. Checking the installed bulb is the most reliable way to confirm the correct size, especially if the truck has been modified or repaired before.