
PIAA 18803 881 Xtreme White Plus
$66.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb, Automatic Transmission Indicator Light Bulb, Ignition Light, Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Check Engine Light Bulb, High Beam Indicator Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 2), Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Courtesy Light Bulb, Trunk or Cargo Area Light
Used for: Dome Light Bulb
Used for: Engine Compartment Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb
This page lists the bulb sizes for the 1995 Dodge Neon by lighting position, so you can quickly verify the correct replacement before you buy. Because trim level, body style, and market can change the lighting setup, it is always best to match the bulb to the exact location on the car rather than assuming one size fits every lamp.
For the 1995 Dodge Neon, common exterior bulbs include 9007 for the headlight high beam and low beam, 3157A for the front turn signal, parking light, and front side marker, and 3157R for the brake light and tail light. Interior and indicator bulbs also vary by location, with examples such as 211-2 for the dome light, 906 for the map light, and PC194 for several dash indicators.
Fitment can vary with trim, lighting package, and market, so compare the bulb in your vehicle before ordering, especially if your Neon has been modified or uses aftermarket housings. Halogen bulbs are the original-style choice for most positions, while LED upgrades may require attention to polarity, brightness, beam pattern, and possible hyperflash on turn signals. If your car has been converted with aftermarket parts, the listed bulb size may still be correct, but the socket or housing design can differ, so checking the installed bulb is the safest way to avoid returns and ensure a proper fit.
The headlight bulb size listed for the 1995 Dodge Neon is 9007 for both high beam and low beam.
The front turn signal bulb size is 3157A.
The 1995 Dodge Neon uses a 3157A bulb for the parking light.
The front side marker light bulb is 3157A.
Both the brake light and tail light use 3157R on this page.
The rear turn signal light bulb is 3157.
The back up reverse light bulb is 3157.
The dome light bulb is 211-2.
The map light bulb size listed here is 906.
The license plate light bulb can be 168 or 917, depending on the lamp setup.
The glove box light bulb can be 194 or 7441.
Yes. The page lists instrument panel bulb options as 161 for one setup and PC194 for another, so it is important to match the bulb to the original socket and cluster configuration.
The turn signal indicator light bulb, high beam indicator light bulb, parking brake indicator light bulb, and check engine light bulb are all listed as PC194.
Yes, many positions can be upgraded to LED, but you should confirm fitment, polarity, and compatibility with the housing. Turn signals may also need load resistors or an LED flasher to prevent rapid blinking.
Check the bulb currently installed in your 1995 Dodge Neon, compare the socket and base style, and confirm the lighting position on the vehicle. This is especially important because trim and lighting package differences can change the correct bulb size.