
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: Center High Mount Stop Light Bulb, Courtesy Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
This page lists bulb sizes for the 2007 Ford Expedition by lighting position so you can quickly verify the correct replacement before you buy. Whether you are replacing a burned-out reverse light, a license plate lamp, or a headlight, checking the bulb chart by location helps reduce guesswork and avoids ordering the wrong part.
The 2007 Ford Expedition uses several different bulb types across the exterior and interior lighting system. Because trim level, body style, and lighting package can vary, it is smart to confirm the bulb size for the exact lamp you are servicing. Use this guide to match each socket to the proper bulb size for your Expedition.
Fitment can vary between trims and markets, so always compare the bulb currently installed in your 2007 Ford Expedition with the chart before purchasing replacements. Halogen bulbs and LED upgrades do not always fit or function the same way, especially if the vehicle uses a specific reflector or lens design. Some aftermarket LED conversions may need extra clearance, resistors, or a compatible flasher to work correctly. If you are unsure, remove the old bulb first and check the number stamped on the base, then buy the same size or a direct-fit equivalent.
The 2007 Ford Expedition uses H13 bulbs for both the high beam and low beam headlights.
The front turn signal bulb size is 3157A.
The parking light bulb size is 3157A.
The rear turn signal bulb size is 4157.
Both the brake light bulb and tail light bulb use 4157R.
The center high mount stop light bulb uses 2825 or 98.
The map light bulb size is 2825 or 98.
The dome light bulb and trunk or cargo area light both use 578.
The glove box light bulb size is 194 or 7441.
The license plate light bulb size is 168 or 917.
The front side marker light bulb size is 194NA.
The rear side marker light bulb size is 4157NA.
The back up reverse light bulb size is 921.
Yes. Trim and lighting package can change the exact bulb used in certain positions, so it is best to verify the installed bulb before ordering.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if the vehicle has been modified or uses an aftermarket lighting setup.