
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Map Light Bulb
Used for: Map Light Bulb
This 2013 Ford F-150 bulb size guide is designed to help you verify the correct replacement bulb by lighting position, so you can match the right part to the right lamp before you buy. Because the truck could be equipped with different lighting setups, it is important to check the exact location on the vehicle rather than assuming every bulb is the same across all trims.
Use this page as a quick reference for common exterior and interior bulbs on the 2013 Ford F-150, including headlights, turn signals, brake lights, reverse lights, license plate lights, and cabin bulbs. The goal is to make bulb replacement easier by separating each lighting position and listing the sizes that fit that specific spot.
Fitment can vary by trim, body style, lighting package, and market, so a bulb listed for one 2013 F-150 may not apply to every truck. Headlight fitment is especially important because this model may use either halogen H13 bulbs or HID D3S bulbs, depending on the factory setup. If your truck has been converted to aftermarket LED or HID lighting, confirm the actual installed bulb type before ordering replacements, since conversion kits and modified housings can change what fits. The safest approach is to inspect the bulb already in the vehicle, compare it with the socket and connector, and use the bulb size on this page as a cross-check before purchase.
It helps you verify bulb sizes by lighting position, such as headlights, parking lights, turn signals, brake lights, reverse lights, and interior lamps, so you can match the correct bulb to the correct location.
No. The 2013 Ford F-150 can use different headlight bulbs depending on the factory lighting setup. Halogen-equipped trucks use H13 bulbs, while trucks with HID headlights use D3S bulbs.
The front turn signal bulb is listed as 3157A for this model year.
The front parking light bulb is also listed as 3157A.
The front side marker light bulb is listed as 168NA.
The license plate light uses 194 or 7441 bulbs.
The map light bulb sizes listed for this truck are 2825 and 98.
The dome light bulb is listed as 578.
The center high mount stop light bulb is listed as 912.
The back up reverse light bulb is listed as 912.
The trunk or cargo area light bulb is listed as 912.
The rear turn signal bulb is listed as 4057, the rear side marker bulb is also 4057, the brake light bulb is 4057R, and the tail light bulb is 4057R where equipped.
Because trim and lighting package differences can change fitment, checking the installed bulb helps confirm the exact size and avoids ordering the wrong part, especially on trucks with modified or aftermarket lighting.
Yes, many owners upgrade to LED bulbs, but fitment and compatibility should be checked carefully. Some LED replacements may need load resistors, adapters, or specific housings to work correctly without warning lights or beam issues.