Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Parking Light Bulb, Side Marker Light Bulb Rear, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Side Marker Light Bulb Front
Used for: Dome Light Bulb
This 2014 Ford Fiesta bulb guide helps you verify the correct bulb size by lighting position, so you can replace the right lamp the first time. Because trim level, market, and body style can change the lighting setup, it is always smart to match the bulb location on your car to the chart before ordering.
For the 2014 Ford Fiesta, the page covers common exterior and interior bulbs such as low beam, high beam, turn signal, brake, tail, reverse, license plate, dome, map, and cargo lighting. Use the position-specific listings to compare your vehicle’s installed bulb with the sizes shown here and avoid mix-ups between front and rear lamps.
Fitment can vary on the 2014 Fiesta depending on trim, lighting package, and whether the car uses halogen or LED components in certain positions. That matters most when you are considering aftermarket LED replacements or a conversion from stock halogen bulbs, since beam pattern, polarity, and physical clearance can affect how well the new bulb works. Before buying, check the bulb already installed in the housing and compare it with the chart, especially for items like the headlight bulbs, parking lamps, and interior lights. If your Fiesta has been modified or repaired before, the installed bulb may not match the original factory specification, so a quick visual check can save time and money.
The listed low beam bulb for the 2014 Ford Fiesta is H11. Always confirm the bulb at the headlamp housing before ordering, since trim and market differences can affect fitment.
The listed high beam bulb is H1. This applies to the charted configuration for the 2014 Ford Fiesta, but it is still a good idea to verify the installed bulb on your specific car.
The front turn signal bulb is listed as 3157A. That same bulb family is also used in some other front-position lamps on this model, so check the socket location carefully.
The rear turn signal bulb is listed as 3157A. If your Fiesta has had tail lamp repairs or aftermarket assemblies installed, confirm the bulb type in the housing before replacing it.
Both the brake light bulb and tail light bulb are listed as 3157R. The same bulb type can serve both functions in the rear lamp assembly, depending on the specific housing design.
The back up reverse light bulb is listed as 921. This is a common fitment for the 2014 Ford Fiesta, but it is still wise to compare it with the bulb already in the socket.
The front side marker light bulb is listed as 168NA. If your Fiesta uses a different lamp assembly due to market variation, check the installed bulb before purchasing.
The rear side marker light bulb is listed as 3157A. Because rear lighting packages can vary, confirm the exact lamp position on your vehicle.
The license plate light bulb is listed as 2825, 98. Either of those bulb references may appear in parts listings, so match the one that corresponds to your existing bulb and socket.
The chart includes dome light bulb 2886X, map light bulb 2825, 98, and trunk or cargo area light 2825, 98. These interior bulb sizes can vary with trim and equipment, so checking the installed bulb is recommended.
The center high mount stop light is listed as LED. Other positions on the car use replaceable bulbs, so the lighting setup is a mix of LED and standard bulb types depending on location.
Yes, but fitment is not always plug-and-play. LED replacements may need the correct base, proper polarity, and enough space inside the housing, and the light output may differ from the original halogen bulb.
Because the 2014 Ford Fiesta can vary by trim, body style, and market, the installed bulb is the best real-world confirmation. A quick check helps avoid ordering the wrong part, especially for headlights and rear lamp bulbs.
