
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Door Mirror Illumination Light Bulb
Used for: Courtesy Light Bulb, Door Mirror Illumination Light Bulb
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2011 Ford Fusion bulb size guide helps you verify the correct bulbs by lighting position, so you can replace a failed lamp without guessing. Because bulb fitment can vary by trim, body style, and lighting package, it is smart to match the bulb location on the vehicle to the chart before buying replacements.
Use this page to find common exterior and interior bulb types for the 2011 Fusion, including headlights, fog lights, turn signals, brake lights, tail lights, license plate lights, dome lights, map lights, and more. Checking the bulb by position is the easiest way to avoid ordering the wrong part and to keep your Fusion lighting working properly.
For the best fit, compare your vehicle’s trim and equipment with the bulb list on this page, since halogen and LED setups can differ by market and package. Some positions may accept aftermarket LED upgrades, but the replacement should still match the socket, size, and beam pattern needed for safe operation. Before you purchase anything, remove the installed bulb and confirm the marking on the base, especially on items like the H11 low beam, 921 reverse light, 7443R rear stop/tail bulb, and 3457A front turn/parking bulb. That quick check is especially useful if your Fusion has been modified or if a previous owner already converted some lights to LED.
The low beam headlight bulb listed for the 2011 Ford Fusion is H11. Always confirm the exact headlamp setup on the vehicle before ordering, since lighting packages can vary.
The back up reverse light bulb is 921 on the 2011 Ford Fusion. If only one reverse bulb is out, replace it with the same type so both sides match in brightness and color.
The front turn signal light bulb is 3457A. On some vehicles this same bulb position can also serve as the parking light, so it is worth checking the socket and function before replacement.
The rear turn signal light bulb listed for this model is 7443. This is a common dual-function bulb used in many rear lamp assemblies.
The brake light bulb and tail light bulb are both listed as 7443R for the 2011 Ford Fusion. If one side fails, replacing bulbs in pairs can help keep the rear lighting even.
The front fog light bulb options listed are H11 LED and H16 LED. Because fog light housings and conversions can vary, check the installed bulb and connector before ordering an LED replacement.
The dome light bulb is 578. This is a common interior bulb size, but the exact lens and fixture style should still be checked before purchase.
The license plate light bulb listed for the 2011 Ford Fusion is 6418. If you are upgrading to LED, make sure the replacement fits the housing and does not cause glare or fitment issues.
The glove box light bulb can be 194 or 7441, depending on the exact setup. Since interior lighting can vary, verify the bulb already installed in your car before ordering.
The front side marker light bulb is 168NA. This is a position-specific bulb, so it is best to match the bulb to the front marker socket rather than relying on appearance alone.
The rear side marker light bulb is listed as LED on this page. Because rear lighting can differ by trim and market, confirm the actual bulb style in your Fusion before replacing it.
Yes, many owners choose LED replacements for interior lights, license plate lights, and some exterior positions. Just make sure the LED matches the socket, fits the housing, and works correctly with the vehicle’s electrical system.
Checking the installed bulb is the safest way to confirm fitment, especially if your Fusion has had previous repairs, aftermarket lighting, or trim differences. It helps you avoid ordering the wrong base, size, or bulb type.