
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb High Beam and Low Beam(with HID headlights), Headlight Bulb Low Beam
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Vanity Mirror Light Bulb
This 2021 GMC Acadia bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Because the Acadia can use different lighting setups depending on trim, package, and market, it is important to confirm whether your vehicle uses halogen, HID, or LED equipment for each lamp location.
Use this page as a quick reference for headlight, tail light, brake light, turn signal, fog light, interior light, and license plate bulb fitment on the 2021 GMC Acadia. Checking by position makes replacement easier and reduces the chance of ordering the wrong bulb size for your specific SUV.
Fitment can vary on the 2021 GMC Acadia, especially between trims and lighting packages, so always compare the bulb listed here with the bulb already installed in your vehicle. Headlights may be halogen or HID on some versions, while other positions may use LED assemblies or standard replaceable bulbs. If you are considering an aftermarket LED conversion, make sure the bulb base, beam pattern, and housing compatibility are appropriate, since not every reflector or projector setup works well with a different light source. Before purchasing, it is smart to remove the old bulb and check the markings on the base, because that is the most reliable way to confirm the correct replacement.
The 2021 GMC Acadia may use D3S for low beam headlights on HID-equipped models, while halogen-equipped models use 9012. Some LED lighting packages may use integrated LED headlamp assemblies instead of a replaceable bulb.
High beam fitment depends on the headlight type. HID-equipped Acadia models use D3S for the high beam, while halogen-equipped models use 9012. LED-equipped versions may have an integrated LED headlight system.
On some LED headlight versions, the high beam and low beam are listed together as an LED assembly. On HID models, the high beam and low beam use D3S. On halogen models, the high beam and low beam use 9012.
The rear turn signal bulb is 7440.
The front turn signal light bulb and the parking light bulb are both listed as 7444NA.
The back up reverse light bulb is 921.
The front fog light bulb may be H11 LED or H16 LED, depending on the trim and lighting package.
Yes. Both the license plate light bulb and the map light bulb are listed as 2825 or 98.
The dome light bulb is 12961, and the vanity mirror light bulb is 6612F.
Yes, the brake light bulb, tail light bulb, center high mount stop light bulb, daytime running light bulb, side marker light bulbs, and some headlight functions may be LED depending on the vehicle configuration.
Check the bulb position on the vehicle, compare it with the bulb listed on this page, and confirm the part number printed on the old bulb if possible. This is especially important because trim and lighting package differences can change fitment.
Aftermarket LED conversions are possible in some locations, but compatibility depends on the housing, connector, and beam pattern. For best results, verify that the LED replacement is designed for your exact bulb position and headlight type.