PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Tesla Model S 2012 Bulb Size
Bulb size chart
Fog Light Bulb Front - LED
Headlight Bulb High Beam and Low Beam(with halogen headlights) - 9005
Headlight Bulb High Beam and Low Beam(with HID headlights) - D3S
Back Up Reverse Light Bulb - LED
Brake Light Bulb - LED
Center High Mount Stop Light Bulb - LED
Daytime Running Light Bulb - LED
License Plate Light Bulb - 6418
Parking Light Bulb - LED
Side Marker Light Bulb Front - LED
Side Marker Light Bulb Rear - LED
Tail Light Bulb Inner - LED
Tail Light Bulb Outer - LED
Turn Signal Light Bulb Front - LED
Turn Signal Light Bulb Rear - LED
9005 Bulbs
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
D3S Bulbs
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
6418 Bulbs
Used for: License Plate Light Bulb
The 2012 Tesla Model S marked the start of Tesla’s flagship sedan, and lighting fitment can vary depending on trim, market, and factory equipment. This page is designed to help you verify the correct bulb sizes by lighting position, so you can match the right part to the right lamp before ordering replacements.
Use the bulb chart for the 2012 Tesla Model S to identify common exterior lighting locations such as headlights, fog lights, brake lights, turn signals, side markers, tail lights, reverse lights, and the license plate lamp. Because Tesla used different lighting packages on this model year, checking the exact position is the best way to avoid buying the wrong bulb.
For the 2012 Model S, fitment can depend on whether the car has halogen headlights or HID headlights, and some lighting parts may be LED assemblies rather than replaceable bulbs. Trim and package differences can also affect the exact setup, especially across different markets and body styles. If you are considering an aftermarket LED conversion, make sure the bulb type, connector, and beam pattern are compatible with the housing. Before purchasing, it is always smart to inspect the installed bulb or compare it with the vehicle’s original equipment, since that is the most reliable way to confirm fitment for your specific car.
FAQ
What bulb size does the 2012 Tesla Model S use for halogen headlights?
The halogen headlight setup uses 9005 for the high beam and low beam position listed on this page.
What bulb size does the 2012 Tesla Model S use for HID headlights?
The HID headlight setup uses D3S for the high beam and low beam position listed on this page.
Are the fog lights on the 2012 Tesla Model S replaceable bulbs?
The fog light front listing on this page is LED, so it is not shown as a standard replaceable bulb size.
What is the license plate light bulb size for the 2012 Tesla Model S?
The license plate light bulb is listed as 6418.
Does the 2012 Tesla Model S use the same bulb for front and rear turn signals?
No. The page lists separate entries for front turn signal and rear turn signal lighting, and both are LED on this model year.
Are the brake lights on the 2012 Tesla Model S a standard bulb type?
The brake light bulb is listed as LED, so it is not shown with a conventional replaceable bulb number.
What should I check before ordering bulbs for a 2012 Tesla Model S?
Check the exact lighting position, verify whether your car has halogen or HID headlights, and compare the installed bulb or assembly with the listing for your vehicle.
Why does the bulb size information vary for the 2012 Tesla Model S?
Trim, lighting package, market, and body style can change the equipment used on the car, so the correct bulb depends on the specific configuration.
Can I use aftermarket LED bulbs in the headlight housing?
You can only do that if the bulb type, connector, and housing design are compatible. Even then, beam pattern and legality should be checked before installing a conversion.
What is the daytime running light bulb type on the 2012 Tesla Model S?
The daytime running light bulb is listed as LED on this page.
Are the tail lights on the 2012 Tesla Model S LED?
Yes. Both the inner and outer tail light bulb listings are shown as LED.
How can I be sure I am buying the correct bulb for my Model S?
The safest approach is to match the bulb size to the exact lighting position on the chart and confirm it against the bulb already installed in your car before buying.