
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Daytime Running Light Bulb, Turn Signal Light Bulb Front
Used for: License Plate Light Bulb, Parking Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
Used for: Vanity Mirror Light Bulb
This 2013 Toyota 4Runner bulb size guide helps you verify the correct bulbs by lighting position, so you can replace a burned-out lamp without guessing. Whether you are changing a headlight, tail light, interior bulb, or reverse light, matching the bulb to the right location is the easiest way to avoid fitment mistakes.
The 2013 Toyota 4Runner uses a mix of standard halogen bulbs, small interior bulbs, and some LED-equipped positions depending on trim and market. Use this page as a quick reference for the bulb chart on this model year, and always confirm the exact lamp location before ordering replacements.
Fitment can vary by trim, lighting package, body style, and regional equipment, so the same 2013 Toyota 4Runner may not use the same bulb in every market. Some positions may be halogen from the factory, while others may be converted to LED with aftermarket parts, especially fog lights, interior lights, and license plate lights. If you are upgrading from halogen to LED, make sure the replacement is compatible with the housing and does not create glare, warning messages, or poor beam pattern. Before buying, it is smart to remove the installed bulb and compare the base and size, since previous owners may have already changed parts.
The low beam headlight bulb listed for the 2013 Toyota 4Runner is H11.
The high beam headlight bulb is 9005.
The back up reverse light bulb is 921.
The front turn signal light bulb is 1156A.
The rear turn signal light bulb is 7440A.
Both the brake light and tail light use 7443R.
The front side marker light bulb is 168NA.
The rear side marker light bulb is 7443A.
The license plate light bulb is 168 or 917.
Both the dome light and trunk or cargo area light use DE3175.
The map light bulb and interior door light bulb are listed as 168 or 917.
The vanity mirror light bulb is 194 or 7441.
The center high mount stop light is listed as LED on this page, while other positions use standard bulb sizes depending on trim and package.
Yes, many owners upgrade to LED bulbs, but the replacement must match the bulb base and fit the housing correctly. Check beam pattern, polarity, and heat management before installing.
Because trim and lighting package differences can change the bulb used in some positions, and previous owners may have installed aftermarket parts. Checking the bulb already in the vehicle helps confirm the correct fitment before purchase.