
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb(with moonroof)
Used for: License Plate Light Bulb, Map Light Bulb(with moonroof)
Used for: Parking Light Bulb, Turn Signal Light Bulb Front Inner
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front Outer
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Map Light Bulb(without moonroof), Trunk or Cargo Area Light
Used for: Map Light Bulb(without moonroof), Trunk or Cargo Area Light
This 2015 Toyota Corolla bulb size guide is designed to help you verify the correct bulb by lighting position before you buy replacement parts. Whether you are changing a headlight, a reverse light, or an interior lamp, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
Because the 2015 Corolla can use different lighting setups depending on trim, body style, and market, it is important to compare the bulb chart with the bulbs already installed on your vehicle. Use this page as a quick reference for exterior and interior bulb positions, including LED-equipped lamps and standard replaceable bulbs.
For the best fit, always check your Corolla’s trim package and lighting equipment before ordering. Some 2015 models use LED assemblies for certain positions, while others may have halogen-style replaceable bulbs in different locations. If you are considering an aftermarket LED conversion, make sure the bulb base, polarity, and housing depth are compatible, since a bulb that fits physically may still cause warning lights, beam pattern issues, or poor output. The safest approach is to compare the installed bulb directly before purchase, especially for lamps that can vary by market or body style.
The low beam headlight bulb listed for the 2015 Toyota Corolla is LED. Because the low beam is shown as LED on this page, you should confirm the exact headlamp setup on your car before replacing it.
The high beam bulb is 9005. This is the standard bulb size shown for the 2015 Toyota Corolla high beam position.
The back up reverse light bulb is 921. If one reverse light is out, replacing both sides at the same time is often a good idea.
The license plate light bulb sizes listed for the 2015 Toyota Corolla are 168 and 917. Either may apply depending on the specific lamp setup.
Yes. The map light bulb with moonroof is listed as 168 or 917, while the map light bulb without moonroof is listed as 194 or 7441.
The dome light bulb is DE3175. This is the interior roof light bulb size shown for this vehicle.
The trunk or cargo area light uses a 194 or 7441 bulb. Check the existing bulb if your car has been modified or if the lamp has been changed before.
Both the tail light bulb and brake light bulb are listed as 7443R. That makes it important to confirm the exact rear lamp position before ordering.
The rear turn signal light bulb is 7440A. This is separate from the brake and tail light bulb size.
The front inner turn signal light bulb is 7444NA, and the front outer turn signal light bulb is 2827. The exact setup can depend on trim and lighting package.
The front side marker light bulb is 168NA, and the rear side marker light bulb is 7443A. These are different bulb types, so match the position carefully.
The daytime running light bulb is listed as LED. In many cases, LED daytime running lights are part of an assembly rather than a simple swap-in bulb, so verify the exact housing before replacing anything.
Trim level, body style, and market differences can change the lighting setup on a 2015 Toyota Corolla. Checking the installed bulb helps confirm the correct base, size, and type, especially when a position may be LED or may vary by package.