
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: Daytime Running Light Bulb(SR), Parking Light Bulb(SR), Turn Signal Light Bulb Front(SR)
Used for: License Plate Light Bulb, Side Marker Light Bulb Front, Map Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front, Map Light Bulb
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Vanity Mirror Light Bulb
Looking up bulb sizes for a 2016 Toyota Tacoma can be confusing because the truck uses different bulbs depending on the light position, trim, and lighting package. This page is designed to help you verify the correct bulb size by location, so you can match the right part for headlights, tail lights, interior lights, and other exterior lamps.
For the 2016 Toyota Tacoma, the bulb chart below organizes common fitments by lighting position, including low beam, high beam, fog lights, turn signals, reverse lights, and cabin bulbs. Using the position-specific listing is the easiest way to confirm what your truck needs before you buy replacements.
Fitment can vary by market, body style, and whether your Tacoma has standard halogen lighting or an LED or special package setup, so it is smart to compare the chart with the bulb already installed in your vehicle. Aftermarket LED conversions can also change the bulb type or require extra hardware, especially in fog lights, parking lights, or daytime running lights. If you are replacing a burned-out bulb, check the existing bulb base and marking before ordering, and confirm whether your truck uses the standard setup or an SR-specific bulb listing where shown.
The low beam headlight bulb size listed for the 2016 Toyota Tacoma is H11.
The high beam headlight bulb size listed for the 2016 Toyota Tacoma is H9.
Front fog light fitment can vary. The chart lists H11 LED and H16 LED for fog light applications, so you should verify which setup your Tacoma uses before ordering.
The standard front turn signal bulb size listed is 7440A.
The rear turn signal bulb size listed for the 2016 Toyota Tacoma is 7443.
Both the brake light and tail light bulb listings show 7443R for this Tacoma.
The backup reverse light bulb size listed is 921.
The dome light bulb size listed for the 2016 Toyota Tacoma is DE3175.
The license plate light bulb listing is 2825 or 98.
The map light bulb listing is 2825 or 98, and the front side marker light also uses 2825 or 98.
The center high mount stop light bulb listing is 168 or 917.
Yes. The SR-specific listings shown on this page include 7442NA for the parking light, daytime running light, and front turn signal bulb positions.
Yes, many owners upgrade to LED, but the correct fit depends on the housing and socket type. Some positions may need LED-specific bulbs or additional compatibility checks to avoid fitment or warning issues.
Because trim and lighting package differences can change the bulb type, and the installed bulb is the best confirmation of what your Tacoma actually uses. This is especially helpful if the truck has been modified or if you are unsure whether it has a standard or SR-specific setup.