
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb, Daytime Running Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Stepwell Light Bulb, Tail Light Bulb Inner
Used for: Stepwell Light Bulb, Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Automatic Transmission Indicator Light Bulb, High Beam Indicator Light Bulb, Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb
Used for: Instrument Panel Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
This 1999 Acura NSX bulb size guide helps you verify the correct replacement bulbs by lighting position, so you can match the right bulb to the right socket before you buy. Whether you are replacing exterior lamps, dashboard indicators, or small interior lights, this page organizes the common bulb sizes for the NSX in one place.
Because trim and lighting equipment can vary by market and body style, it is always smart to compare the bulb chart with the bulbs already installed on your car. Use this guide as a reference for the 1999 Acura NSX, then confirm the fitment at each lamp location for the best results.
Fitment can differ between standard halogen setups, factory options, and aftermarket LED conversions, so do not assume every NSX uses the same bulb in every position. Some owners may find that a previous repair or conversion changed the bulb type, especially in exterior lamps and interior courtesy lights. Before ordering, check the installed bulb, the socket, and the lens area for any markings or adapter hardware. If you are upgrading to LED, make sure the replacement is compatible with the vehicle’s electrical system and that the beam pattern, polarity, and warning behavior are acceptable for the application. When in doubt, compare both the chart and the original bulb before purchase.
It helps you match bulb sizes to specific lighting positions on the car, such as the headlight high beam, brake light, license plate light, dome light, and instrument panel lights.
The listed high beam headlight bulb is 9005.
The brake light bulb size listed is 2057R.
The inner tail light bulb is listed as 168 or 917, and the outer tail light bulb is listed as 2057R.
The license plate light bulb is listed as 194 or 7441.
The dome light bulb is DE3175.
Both the front turn signal light bulb and rear turn signal light bulb are listed as 3497.
The daytime running light bulb is 1156.
The back up reverse light bulb is 1156.
The instrument panel light bulb is listed as 158.
Yes. Both the front side marker light bulb and rear side marker light bulb are listed as 168NA.
Check the exact lamp position, compare the installed bulb to the chart, and confirm whether your car has factory equipment or an aftermarket conversion that may change the required bulb type.
Many positions can be converted to LED, but fitment and function depend on the socket, polarity, and vehicle setup. Always verify compatibility before ordering LED replacements.
Some locations may have variations by market, trim, or prior repairs, so the chart may list more than one bulb option when the exact original setup can differ.