
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Automatic Transmission Indicator Light Bulb
Used for: Courtesy Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Courtesy Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Reading Light Bulb Rear
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2010 Acura RL bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right lamp without guessing. Whether you are shopping for a headlight, interior bulb, or rear signal light, the chart is organized to make fitment checks faster and easier.
Because trim and lighting equipment can vary, especially by market and body style, it is smart to match the bulb type to the exact location on your RL before ordering. Use this page to compare the listed bulb sizes for the 2010 Acura RL and confirm what belongs in each socket.
For best results, compare the bulb listed here with the one already installed in your vehicle, especially if your RL has optional lighting packages or has been modified before. Some positions use LED assemblies, while others use halogen-style bulbs or HID components, so do not assume every lamp on the car uses the same technology. If you are considering aftermarket LED conversions, check for proper beam pattern, polarity, and any required resistors or adapters. When possible, remove the old bulb first and verify the base and connector before buying replacements, since a close match is not always an exact fit.
The low beam headlight bulb listed for the 2010 Acura RL is D2S. This is the bulb position to check if your low beam is out or dim.
The high beam bulb is 9005. The same 9005 bulb is also listed for the daytime running light on this model.
The front turn signal light bulb is 1157A. If the signal is flashing quickly or not lighting, this is the bulb position to inspect first.
The parking light bulb is 1157A. That makes the parking light and front turn signal positions easy to cross-check on this year and model.
The rear turn signal light bulb is 7440A. This is a separate fitment from the front signal bulb.
The back up reverse light bulb is 7440. If the reverse lamps are not working, confirm this bulb size before ordering replacements.
The license plate light bulb sizes are 2825 and 98. Either size may be listed depending on the specific lamp setup.
The map light bulb, interior door light bulb, and courtesy light bulb are listed as 194 and 7441. These shared sizes are common in several cabin positions on the RL.
The dome light bulb is DE3175, and the rear reading light bulb is also DE3175. If one cabin light works and another does not, check the matching bulb size for that location.
The trunk or cargo area light uses 168 or 917. These are the bulb sizes to verify if the cargo lamp is dim or burned out.
Yes, the chart lists LED for the center high mount stop light, brake light, tail light, and rear side marker light. Because these are LED positions, replacement may depend on the complete lamp assembly rather than a simple bulb swap.
Check the exact lighting position, compare the installed bulb base, and confirm whether your RL has the standard setup or an optional package. It is also wise to verify whether the bulb is halogen, HID, or LED before purchasing, especially if the car has been modified.