
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Trunk or Cargo Area Light
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Automatic Transmission Indicator Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Vanity Mirror Light Bulb
This 2010 Acura TSX bulb size guide helps you verify the correct bulb by lighting position, so you can replace a failed lamp without guessing. Because Acura used different lighting setups depending on trim, body style, and market, it is always smart to match the bulb to the exact location on the car before ordering.
For the 2010 TSX, the chart below covers common exterior and interior bulbs such as the low beam, high beam, fog light, tail light, brake light, license plate light, dome light, map light, and more. Use it to compare your vehicle’s installed bulb with the listed fitment and choose the right replacement the first time.
Fitment can vary on the 2010 Acura TSX, especially if your car has a lighting package, a different body style, or a previous owner installed aftermarket parts. Some positions may use halogen bulbs, while others may be converted to LED replacements, and that can change brightness, color, and connector compatibility. If you are replacing a bulb with an LED aftermarket option, make sure the base type and physical size still match the housing, and check for polarity or warning-light issues where applicable. The safest approach is to inspect the bulb already installed in your vehicle before buying, since the same model year can have small differences by market and equipment.
The low beam bulb listed for the 2010 Acura TSX is D2S. This is the bulb size shown for the low beam headlight position on this page.
The high beam bulb size is 9005 for the 2010 Acura TSX.
The daytime running light bulb size listed for the 2010 Acura TSX is 9005.
The front fog light bulb is listed as H11 LED or H16 LED. Because fog light setups can vary, confirm the bulb already in the car before ordering.
Both the tail light and brake light bulb sizes are listed as 7443R for the 2010 Acura TSX.
The front turn signal bulb size is 7528, and the rear turn signal bulb size is 7440A.
The license plate light bulb size listed for the 2010 Acura TSX is 168 or 917.
Both the dome light and map light use DE3175 bulbs on this vehicle.
The back up reverse light bulb size is 7440 for the 2010 Acura TSX.
The center high mount stop light bulb size is 7440.
The front side marker light bulb size is 7528, while the rear side marker light bulb size is 168NA.
The vanity mirror light bulb is 6615F, and the trunk or cargo area light uses 168 or 917.
Yes. Trim, lighting package, body style, and market can affect bulb fitment on the 2010 Acura TSX, so it is best to verify the exact position on your car.
In some positions, yes, but the LED must match the correct base and fit inside the housing. You should also check beam pattern, polarity, and any compatibility issues before converting.
Check the bulb currently installed in your 2010 Acura TSX and compare it with the bulb chart for the exact lighting position. This is the most reliable way to avoid buying the wrong part.