
AUTOONE 9006/HB4 LED Bulbs, 70000LM 1200% Ultra Bright, R...
$26.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Vanity Mirror Light Bulb
This page covers the 2018 GMC Yukon XL and helps you verify the correct bulb size by lighting position. Whether you are replacing a headlight, reverse light, license plate light, or vanity mirror bulb, matching the bulb to the exact location is the safest way to get the right fit.
The Yukon XL can use different bulbs depending on trim, lighting package, and market. That means the low beam, fog light, and other exterior lamps may not be the same on every vehicle, so it is important to confirm the bulb type before ordering replacements.
For the 2018 GMC Yukon XL, fitment can vary between halogen and HID-equipped models, and some trucks may also have different lighting setups because of trim level or factory options. The low beam bulb is H11 on halogen headlights and D3S on HID headlights, while the front fog light bulb is listed as 9006 LED for the optional setup shown here. If your Yukon XL has been modified with aftermarket LED or HID conversion kits, the original bulb chart may no longer match what is installed. Before buying, check the bulb already in the housing, compare the connector and base style, and confirm whether your vehicle uses factory halogen, factory HID, or a converted setup.
The high beam headlight bulb size listed for the 2018 GMC Yukon XL is 9005.
For halogen headlights, the low beam bulb size is H11.
For HID-equipped headlights, the low beam bulb size is D3S.
The front fog light bulb listed here is 9006 LED, which applies to the optional fog light setup shown on this page.
The back up reverse light bulb size is 921.
The license plate light bulb size listed for this vehicle is 2825.
The vanity mirror light bulb size is 6612F.
Trim level, lighting package, body style, and market can change the bulb used in a specific position. The same year and model can have different headlight or fog light setups.
Check the headlight housing and the bulb already installed. Factory HID systems use D3S low beam bulbs, while halogen systems use H11 low beam bulbs.
Not always. Aftermarket LED or HID conversions can change the bulb type from the original factory specification, so it is best to inspect the installed bulb before buying replacements.
Yes, but many owners replace bulbs in pairs for more even brightness and color, especially for headlights.
Use the bulb position on the vehicle, confirm whether the truck has halogen or HID headlights, and compare the old bulb to the replacement before installation.