
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb, Turn Signal Light Bulb Front
Used for: License Plate Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 2)
Used for: License Plate Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 2)
Used for: Parking Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Automatic Transmission Indicator Light Bulb, High Beam Indicator Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 3), Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Instrument Panel Light Bulb(Compare to original - Option 1)
This page covers bulb sizes for the 1990 Honda Accord and helps you verify the correct bulb by lighting position. Whether you are replacing an exterior signal lamp or a small interior courtesy bulb, matching the bulb to the exact location is the easiest way to avoid ordering the wrong part.
The 1990 Honda Accord used a mix of common halogen and miniature interior bulbs, and some positions can vary by trim, market, or body style. Use the bulb chart on this page to compare each light location before buying, especially if your Accord has different factory lighting equipment.
For best fitment, confirm the bulb already installed in your Accord before you purchase replacements, since trim package and regional differences can affect certain positions. This is especially important if you are switching from halogen to LED, because aftermarket LED bulbs may fit the socket but still require attention to polarity, beam pattern, and physical clearance. Some conversions also need resistors or other load-management parts to prevent fast flashing or warning issues. If you are replacing an exterior lamp, check the lens condition and socket corrosion at the same time so the new bulb performs as expected.
The high beam bulb listed for the 1990 Honda Accord is 9005.
The back up reverse light bulb is 1156.
Both the brake light and tail light use 2057R on this page.
The center high mount stop light bulb is 3497.
The daytime running light bulb is 9005.
The license plate light bulb sizes listed are 194 and 7441.
The front turn signal light bulb is 3497, and the rear turn signal light bulb is 1156.
Both the front side marker light and rear side marker light use 168NA.
The parking light bulb listed for this Accord is 3652.
The dome light uses DE3175, while the courtesy light, glove box light, interior door light, and trunk or cargo area light use DE3021.
This page lists three instrument panel options: 168 or 917, 194 or 7441, and 2721, depending on the original setup.
Yes. The ash tray light, automatic transmission indicator light, high beam indicator light, parking brake indicator light, and turn signal indicator light are listed with 2721, while the ash tray light also has an alternate option of 74.
Because the 1990 Honda Accord can vary by market, body style, and equipment level, some bulb positions may differ from one vehicle to another.
Halogen bulbs are the closest match to original equipment, while LED upgrades can improve brightness but may need compatibility checks for fit, polarity, and beam control.
Check the installed bulb number, inspect the socket, and confirm the exact lighting position on your Accord before buying replacements.