Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Front
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Trunk or Cargo Area Light
Used for: Parking Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Map Light Bulb
This 2002 Honda S2000 bulb guide is designed to help you verify the correct bulb size by lighting position, so you can match the right replacement to the right lamp. Because trim, market, and lighting package can vary, it is always smart to confirm the bulb type for each location before ordering.
For the 2002 Honda S2000, the chart below covers key exterior and interior bulbs such as headlights, turn signals, brake lights, side markers, license plate lights, and map lights. Use it as a quick reference when replacing a burned-out bulb or planning a full lighting refresh.
Fitment can differ between trims, body styles, and regional specs, so the same 2002 Honda S2000 may not use identical bulbs in every market. That matters even more if the car has been modified with aftermarket housings, LED conversions, or nonfactory headlight parts. Some positions may originally use halogen bulbs, while others may have been upgraded to LED by a previous owner. Before you buy, check the bulb already installed in the car and compare it with the chart, especially for headlight and rear lamp applications where conversions are common. If you are switching to LED, make sure the bulb base, depth, and connector style still match the housing and that the new bulb will work properly with the vehicle’s electrical setup.
The listed low beam headlight bulb for the 2002 Honda S2000 is D2S. This is the bulb size shown for the low beam position on this page.
The high beam headlight bulb is H1. If you are replacing both sides, check the installed bulbs and the headlight housing before ordering.
Yes, the chart lists H1 for both the high beam and daytime running light positions. That makes it important to verify the exact lamp location before replacing anything.
The front turn signal bulb is 7440. This is the bulb size listed for the front turn signal light position.
The rear turn signal bulb is 7507. Use that size for the rear turn signal position on the 2002 Honda S2000.
Both the brake light and tail light positions are listed as 7443R. That means the same bulb size appears in both rear lighting functions on this page.
The back up reverse light bulb is 7440. If one reverse light is out, it is a good idea to replace both sides at the same time.
Both the front side marker light and rear side marker light are listed as 168NA. Make sure you match the side and position when replacing them.
The license plate light bulb is listed as 2825 or 98. Either of those bulb designations may be shown for this position on the page.
The parking light bulb and the trunk or cargo area light are both listed as 168 or 917. Check the installed bulb if you are unsure which version your car uses.
The map light bulb is DE3022. This is the interior bulb size shown for the map light position.
The center high mount stop light is listed as LED. That means the original setup is not shown as a replaceable standard bulb size on this page.
Because trim and lighting package differences can change fitment, and aftermarket parts may not match the factory bulb chart. Checking the installed bulb helps avoid ordering the wrong size, especially on a 2002 Honda S2000 with modified lights or swapped housings.
