Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
This 2007 Honda S2000 bulb guide is designed to help you verify the correct bulb size by lighting position before you buy replacements. Whether you are changing a headlight, a license plate lamp, or an interior bulb, matching the bulb to the exact location is the safest way to avoid fitment mistakes.
Because lighting equipment can vary by market, trim, and body style, this page focuses on the bulb chart for the 2007 Honda S2000 and organizes the information by function. That makes it easier to compare the bulb you need with the one already installed on the car.
For the best fit, always confirm the bulb currently in the vehicle before ordering, especially if your S2000 has been modified or converted with aftermarket lighting. Some positions may use halogen bulbs from the factory, while others may already have LED replacements installed, and that can affect both brightness and physical fit. Trim and package differences can also change the exact setup, so if your car has had a headlight, tail light, or interior light conversion, check the housing and connector style carefully. When in doubt, remove the old bulb and compare the base and markings before purchase.
The low beam headlight bulb listed for the 2007 Honda S2000 is D2S. This page uses the bulb position to help you confirm the correct fit before buying replacements.
The high beam headlight bulb is H1. If you are replacing both sides, it is usually a good idea to replace them in pairs so the light output stays even.
Yes, the bulb chart lists H1 for both the daytime running light and the high beam position. Always verify the installed setup, since lighting packages can vary by market.
The front turn signal light bulb is 7440. This is one of the most useful bulbs to confirm by position because the same base can appear in other rear lighting locations too.
The rear turn signal light bulb is also 7440. Even when the front and rear use the same bulb size, the housing and access method can be different.
The back up reverse light bulb is 7440. If your reverse lights are dim or intermittent, check the bulb, socket, and lens condition before replacing other parts.
The license plate light bulb is listed as 2825 or 98. If you are switching to LED, make sure the replacement is compatible with the housing and does not create glare.
The trunk or cargo area light uses 168 or 917. Interior bulbs are often easy to replace, but it is still best to compare the old bulb before ordering.
The map light bulb is DE3022. This helps you identify the correct interior bulb if the overhead lamp is no longer working or has been upgraded.
Both the parking light bulb and the front side marker light bulb are listed as 2827. If one side has been changed before, check both sides so the lighting color and brightness match.
The rear side marker light bulb and the brake light bulb are listed as LED on this page. Since the chart does not provide a specific part number, it is important to verify the installed bulb or factory LED assembly before purchasing.
The chart lists the tail light bulb as LED. Because no exact bulb number is provided, you should inspect the existing setup to confirm whether your car uses an LED assembly or a serviceable bulb-style replacement.
