Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Stepwell Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2017 Infiniti QX60 bulb size guide helps you verify the correct bulbs by lighting position, so you can replace only the lamp you need with confidence. Because the QX60 can use different lighting setups depending on trim, market, and package, checking the exact bulb location is the safest way to match the right part before ordering.
Use this page as a quick reference for exterior and interior lighting on the 2017 Infiniti QX60. It covers common positions such as headlights, fog lights, brake lights, reverse lights, license plate lights, dome and map lights, and other cabin or accent bulbs, making it easier to compare your vehicle’s installed bulbs with the listed sizes.
Fitment can vary on the 2017 QX60, especially between trims, lighting packages, halogen versus LED equipment, and regional builds. Some positions are listed as LED assemblies, while others use replaceable bulb types such as 921, 168/917, 194/7441, 7444NA, 7440, DE3175, 158, and D2S. If you are planning an aftermarket LED conversion, make sure the bulb base, length, polarity, and heat output are compatible with the housing, since not every LED replacement will work correctly in every socket. For the most reliable result, confirm the bulb currently installed in your vehicle before buying, especially if the vehicle has been modified or if a previous owner changed the lighting.
The listed headlight bulb type for both high beam and low beam is D2S, but this applies to the specific setup shown for this page. Because headlight equipment can vary by market or package, confirm the bulb in your vehicle before replacing it.
The fog light front position is listed as LED. On many vehicles this means the light is part of an LED assembly rather than a simple plug-in halogen bulb, so replacement may involve the complete unit instead of just a bulb.
The rear turn signal light bulb is listed as 7440. Always compare the old bulb to the new one before installation, since socket style and lighting package can affect fitment.
The front turn signal light bulb is listed as 7444NA. This is a specific amber bulb type, so make sure the replacement matches the same base and color output.
The back up reverse light bulb is listed as 921. This is one of the most common fitment checks for owners replacing a burned-out reverse lamp.
The license plate light bulb is listed as 168 or 917. Either number may appear depending on the bulb maker, but both are used for this position on the page.
Those interior positions are listed as 194 or 7441. The same bulb type is shown for the dome light, map light, and interior door light areas.
The trunk or cargo area light is listed as DE3175. This is a useful reference when replacing the rear cargo lamp in the QX60.
The stepwell light bulb is listed as 158. If your vehicle has stepwell lighting, check the installed bulb before purchase because interior trim differences can affect the exact setup.
Yes, the brake light bulb and tail light bulb positions are listed as LED on this page. In many cases that means the light is integrated into an LED unit rather than a standard replaceable bulb.
Yes, the parking light bulb, daytime running light bulb, front side marker light bulb, and rear side marker light bulb are all listed as LED. That usually indicates an LED-equipped lighting system, though exact design can vary by trim and market.
Use the bulb position on the vehicle, compare it with the chart, and verify the bulb already installed in the car whenever possible. This is especially important on the QX60 because trim level, lighting package, and body style can change the correct fitment.
